fbpx

Kentucky Construction – Excavating – Logging Consignment Auction

580 E. Princeton St. Crofton KY 42217
September 19, 2020, 9:00 am
Owner: R&S Equipment


Kentucky Construction – Excavating – Logging Consignment Auction at R&S Equipment

Sept. 19, 2020

BID ONLINE 

https://bid.brightstarauctions.com/ui/auctions/53460

 

9am CDT new tools & smalls

10am CDT for cataloged items

Address: 580 E. Princeton St. Crofton KY 42217

Terms: Payment in full day of sale. Cash, check, or major credit card. 2% convenience fee for all credit/debit card transactions. All items sell absolute unless otherwise advertised. 10% buyer’s premium applies to all purchases. Additional buyer’s premium for online and phone bidding.

Free food for all onsite bidders!

Sellers: R&S Equipment

See brightstarauctions.com for online bidding and much more…

Contact Eugene: 260.350.8953

Live phone and online bidding available!

Contact Myron @ 574-229-4341 to consign equipment for free marketing!

Lots of quality unlisted small tools and equipment to begin the auction!

BID ONLINE 

https://bid.brightstarauctions.com/ui/auctions/53460

1 Pictures of smalls Smalls that will be sold onsite only

150 Bend-Pak Drive on Loft Model S202.7T *5319, type 1628, 4-post, ground mount, 14,000 lb. lift capacity, date code w7, approximately 7 yrs. old. In good condition!

151 Hunter Alignment Machine Model S311, pin 30-363-1. Complete unit is in good working condition!

152 Coats Tire Changing Machine Model 40-40SA. In working condition.

152A Tire Fill Safety Guard Good condition!

153 Inland Parts Washer Model LT48M4, s/n 100037824, electric pump. In working condition.

154 Industrial Electric Panel Unitrol panel with 2-Nema size 1 starters and 1-size 3. Industrial panel with Allen Bradley Power Flex 700 soft start.

155 Electric Panel Model 4 control center, 12 shut offs with Nema size 1. Most fuses are missing.

156 Unitrol Electric Control Station No. 6AF829288-M, 480 volts, size 1 Nema starters/shut offs.

157 Unitrol Electric Control Station No. 6AF829288-G, 480 volts, 1-Allen Bradley remote programming adaptor, 1-size 2 and other size 1 Nema starters.

158 Unitrol Electric Control Station No. 6AF829288-L, 480 volts, 1-Allen Bradley remote programming adaptor, 1-size 2 and other size 1 Nema starters.

159 Skid of Electric Shut Offs Various sizes

160 Skid of Brackets Misc. electrical box brackets

161 Skid of Electric Shut Offs Various sizes

162 Baldor Bench Grinder 1/2 hp, on stand, with light, 3-phase, 3000/3600 rpm, s/n F685

163 Clausing Drill Press Model 1690, s/n 524062, 3/4 hp single phase motor, adjustable platform.

164 Baldor Grinder/Buffer On stand, 1/3 hp, single phase, 3600 rpm

165 Niagara Metal Shears One series power shears, 72″ capacity, 14 gauge US standard, s/n 57692. Good working condition!

166 Dake Arbor Press Model 3A, 1P, Grand Haven MI

167 Harig 618W Surface Grinder Model 618W, 480 volt. In working condition.

168 Logan Powermatic Lathe Model 1110008-L00H, complete with chuck and bits, 42″ long table, 1 1/2 hp Leeson electric motor.

169 Do All Horizontal Bandsaw Model #C-916M, s/n 501-93240, 3-phase, 2 hp, 159″ blade, 18″ cutting width. In good condition!<br /> 170 Dayton Band Saw Model 2AC27A, lot #031300003, single phase, works

171 Hoffman Centrifugal Exhauster Model 74106A8, s/n M099030, 25 psi. Condition unknown.

172 22″ Exhaust Fan Baldor 15 hp electric motor, 3 phase

173 20″ Exhaust Fan Baldor 5 hp electric motor, 3 phase, on rolling stand, with air filter

174 36″ Dust Blower Arenco-Cardwell, model IE-563, s/n 1177-044-2A, w/30 hp US electric motor, 3 phase, no blower fan cover

175 Skid of 8′ Pallet Racking Arms 8′ arms, 30 pieces total

176 Mac Engine Allison Transmission Came out of Fire Truck, was working when taken out, either 237 or 300 hp

177 3208 Cat Engine Came out of Fire Truck, was working when taken out, either 210 hp

178 6.0 Ford Motor & Transmission Came out of a 2004 Ford F-450. Motor has issues.

179 855 Cummins Engine Came out of Fire Truck, was working good when taken out, 3 new heads.

180 Genie Runabout Man Lift 2002, Model GR-15, s/n GR02-1287

181 Electro-Matic Demagnetizer Model A164, type 1044, Series A

182 2 Hydraulic Cylinders Hydro-Line, 84″

183 Shelving 2 skids of misc. shelving

183A Truck & Trailer Air Lift Model TNT550, Series B, 5 1/2 ton lift capacity, works

184 Engine Stand On rollers, transmission shaft style

185 Norco Wheel Dolly 1 1/2 ton

186 Ex-Cell Engine Stand 1000 lb. capacity, on wheels

187 Pinnix Engine Stand Adjustable height and swivel, on wheels

188 Motion Industries Hydraulic Pack 1200 psi, 7.5 hp, 7.5 gpm, s/n 22954

189 Dodge Gear Motor Master XL right angle gear motor and c-face reducer size 40 and size H419 c-face reducer

190 Weg 50 hp Motor New, 1770 rpm, frame 326T

191 Reliance Electric 40 hp Motor New, 2670 rpm, frame 324T

192 Reliance Electric 10 hp Motor New, 2650 rpm, frame L215TC

193 Reliance Electric 30 hp Motor New, 2660 rpm, frame 286T

194 Dodge Gear Motor Size 210-PM4A-7.6-A1, ratio 7.6

195 Baldor 75 hp Motor 3550 rpm, Frame 364TCZ, with G&L pump model SSH mounted on

196 Skid of Misc. Starters, chain, air hose, etc.

197 125 hp Electric Motor 1775 rpm, frame 405T, w/adjustable frame, 10 v pulley

198 3 Shop Carts 27″x39″

199 Mettler-Toledo Hi-Speed Check Weighing Model XS2, s/n 10035812, job #100358, Krones software, plus Redron Parts

200 Skid of Misc. Shovels, jack hammers

201 Skid of Misc. Chain binders, straps, etc.

202 Skid of Misc. Misc.

203 Honda EB 3800X Generator Condition unknown

204 Airco Welder Stick welder on cart

205 Torch Cart 24″ wide

206 Torch Cart 20″ wide

207 Torch Set Mini torch set, complete

208 Wissota Bench Grinder 1/2 hp

209 L-Tec Plasma Cutter PCM-34i, 460 volt

210 Milwaukee Metal Chopsaw 14″, 3900 rpm, with blade

211 Jepson Metal Chopsaw Model 9514, 3100 rpm

212 Matco Porta Power 10 ton

213 Ohaus Scales 20 kg – 45 lb.

214 Metal Cabinet On wheels

215 Lathe Parts Whole skid

216 Skid of Misc. Heater, bolts, etc.  217 Skid of Hoes Heavy hydraulic and others  218 Transmission Ch 670 Road Grader Condition unknown 219 Engine Block and Head John Deere 6068 engine  220 Transmission for 544B Wheel Loader In working condition  221 John Deere 6414 Engine One rod is out  222 Transmission and Hydraulic Pump Came out of Gradall. In working condition.  223 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40  224 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40 225 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40  226 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40  227 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40  228 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40  229 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40  230 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40 231 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40 32 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40  233 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40 234 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40  235 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40 236 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40  237 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40  238 Bundle of Posts 6′ posts, treated pine, were used for guard rails, approx. 40 239 Hydraulic Fork Extender Fork lift attachment that extends to unload containers  240 Skid Loader Clamp Attachment Hydraulic clamp, 48″ x 32″ high 241 Fork Lift Clamp Attachment Hydraulic clamp, 30″ x 20″ clamp  242 Skid Loader Clamp Attachment Hydraulic clamp, 48′ x 48″ clamp, rubber lined

243 Knuckle Tool Box Job site box  244 Fuel Tank Approx. 30 gal 245 Forks Pair 60′, no attachment brackets  246 Kooi Reachforks Type RE4-25-1350-1000, 1250 lb. capacity, hydraulic extenders  247 Kooi Reachforks Type RE4-25-1350-1000, 1250 lb. capacity, hydraulic extenders  248 Pair of Forks 42″  249 Pair of Forks 48″  250 3 Forks 42″

251 Hitch Receiver Used  252 2000 Freightliner Front & Rear End Air ride suspension  254 Stainless Box With lid, 44″ x 66″ x 28″ 255 Forks With side guard 256 Aluminum Platform Steps 16″ x 60″ tall, rolling 257 Aluminum Platform Steps 24″ x 58″ tall, rolling 258 Hydraulic Tank Steel, 21″x 27″ x 21″ 259 Fuel Tank Aluminum, 120 gal  260 Auger 30″ x 45″

261 Grader Blade 12′ x 23″. Good edge! 262 Hoist Arm 3-Point  263 SEC Ripper Will fit, Cat 325-L, 325-BL, EL300-B, EL240B, 322BL, Komatsu PC220, PC240 264 Hensley Excavator Bucket Came off of a 300 Komatsu, 24″ 265 Balderson Loader Forks Model BF9770, s/n W03046, 48″ forks  266 Protech Headache Rack Diamond plate, 70″ x 50″, chain hooks 267 Headache Rack Aluminum, 91″ x 48″ 268 Bush Hog 3-Point, PTO drive, 62″. Rough condition. 269 John Deere Radiator & Oil Cooler Off of a 544B 270 Ramsey Winch No drive 271 Utility Bed Model 3016, with IMT crane arm, air compressor, 94″ x 111″

 

500 Caterpillar 559B Knuckleboom 2012, Model CAT559B-DS,s/n 559PRG5259, joystick controls, mounted on trailer, CTR delimber/top saw, continuous swivel grapple, good tires on trailer. Rare find! Clean machine!

501 CTR Buck Saw With 14′ bed. Was being run by Cat Knuckleboom

501A 210D Prentice Works ok, hrs unknown, needs work

502 Caterpillar 533 Cutter Prentice CFR00204 Cutter Head, s/n 194-2963, 5947 hours. Front tires at 70%, rear tires at 40%. Good working machine!  502A Cat 525C Grapple Skidder More information coming soon

503 Caterpillar Excavator Model 325BL, s/n 2JR895, 12,741 hrs., 48″ bucket with hydraulic thumb, like new hydraulic pump, good under carriage, repacked cylinder. Good operating machine!

504 John Deere Grader Model 770CH, s/n DW770CH561833, 12′ blade, good tires, good working machine. Has auxiliary hydraulic for additional side blade (sold as next lot)

505 Rockland Grader Side Blade Model RS 770CH, s/n N9341, side blade attachment, 16″. Good condition!

506 Lots 504 & 505 as entirety Will take a 10% raise to tie together and then sells as a combination.

507 Caterpillar D7E Dozer s/n 75E191, very good pads and under carriage, with Hyster 07H winch. Good working machine!

508 Ashland I-175 XL2 Scraper Model I-175 XL2, s/n 23801, Cap Heaped 17.5. Has seen very little use and is in excellent condition!

508A Caterpillar 621 Scraper s/n 23H561, motor runs but needs new radiator, all hydraulic work, runs and operates but has sat for a few years.

509A Kawasaki Wheel Loader Model 652V, s/n 65C4 5122; 7567 hours, Nice clean good running machine, JRB quick attach, front tires @ 60% rear @ 15%

509B Pemberton Dirt Bucket 96″ bucket, good edge, JRB quick attach style

509C Gem Loader Forks 5′ forks, JRB quick attach style

509D 2006 Kawasaki Loader 65Z, 11,455 hrs, One Owner, A/C Cold, Serviced it Regularly, Runs Great, Runs Strong, Solid Machine!!!

510 John Deere 544C Wheel Loader s/n U5 158, 1070 hours showing (assuming 11,070 actual hours). Weak transmission. Runs

511 John Deere 544 Wheel Loader s/n 0850W, Type Terrain, weak transmission, 7348 hours showing, JRB quick disconnect. Runs

511A Caterpillar Fork Lift Model V200, s/n 20V158, 8′ forks, 20,000 lb. lift capacity. Runs

512 Mac Dump Truck 2000, Model DM690S, 65k miles, 350 HP Mac engine, tri-axle. Good truck! VIN IM2B221C7YM027249

513 Mack Dump Truck 2001, Model RD688S, 715,140 miles, Mac 330 HP Engine, tri-axle, box is in good condition 8’x16’x5′. Good working truck that is being used everyday! VIN 1M2P267C11M057308<br /> 514 International Dump Truck 1972, Model 1310, s/n B13301H257213, 6223 miles showing, International 8 Cylinder gas engine, good tires, 7’x 12′ dump bed 3′ high.

515 Ford L9000 Roll Off Truck 1995, L10 Cummins engine, 486,840 miles, hydraulic are good. Good, solid truck! VIN 15DZY90LXTVA12108

516 International Semi Tractor 1999, 520,706 miles, with sleeper cab, new paint and new tires, 500 hp 12.7L 60 Series Detroit Diesel engine, 18 speed transmission. New head and injectors. With wet kit. Good running truck!

517 International Day Cab Truck 2011 Model Pro-Start 1226X4, 10 speed, 296,209 miles, Maxxforce 13 Model A475 12.4 L Engine, with wet kit, 475 hp. Good clean running truck! Like new drive tires! VIN 3HSDJSJR7CN591390

518 Freightliner Day Cab Truck 2002, 196,860 miles, 10 speed,Detroit 60 Series 12.7L Engine, good steer tires, like new drive tires, runs good. Was mostly used local. In great condition!

519 Sterling Day Cab 2000, 495,702 miles,&nbsp; CAT C-12 Engine,10 speed transmission. Good running truck! VIN 2FWJA3AS51AH70903

519A Hercules Lowboy Trailer Detach, 60 ton

520 Fontaine Lowboy Detach Trailer 1994, 21 belly, Model TB-50/NCB, Mostly good tires (1 needs replaced). Wood floor might need replaced.

521 Fruehauf Van Trailer 1974, Model FGG-F2-40, s/n HPS494726, GVWR 68,000 lbs., movable rear axle, and good tires.

522 Fruehauf Van Trailer Wabash re-manufactured 1996, closed top. Bill of sale only. VIN TR5V02816EM016145<br /> 523 Log Trailer 3 bunk, 48′, cable tie downs. Has title.

524 Trail King Drop Deck Flatbed Trailer With hydraulic dovetail, 45′ wooden deck, air ride, good rubber, sells with title. In good condition!

525 Trailer 76″x16′, wooden tilt deck, pintle hitch, shop built. Bill of sale only.

526 Trailer 5’x8′, wooden deck, draw bar pull, shop built. Bill of sale only.

527 Trailer with Blower Pintle hitch, set up for motor drive, clutch is still attached, engine controls, fuel tank

528 Fertilizer Buggy PTO drive, good air tires, good feed chain. In good condition!

529 Onan 60 kw LP Generator Model 60EN, s/n H910415178, 497 hours, 60 hz, single or 3-phase, Ford engine. Good working unit. Clean and ready to go!

530 LS U5030 Tractor Model U5030C, 406 hours, 50 hp, with loader attachment and bucket. Cab w/heat, AC, & stereo. 4-wheel drive, fully equipped with lights, 3-point, draw bar pull, PTO, aux hydraulic, 1 broken tail light.

530A 61″ Scag Wildcat Zero Turn Mower Model# kstk1, 26hp Liquid Cooled Engine, Has new oil and Filters, Blades Sharp, hr meter doesn’t read hrs approx 1000, Starts and Runs Fine

531 Brubaker Style Custom Sawmill Portable sawmill, new in 2018! 4 cylinder Kubota Diesel 1200 Series, 2000 total engine hours, 21″ band wheels, 1 1/2″ band w/debarker, 2 log leveler, 3 log clamps, 3 board clamps, air wheels, 26″x24′ cut capacity, 36″ pass through capacity. Has not been used much and is in great working condition!

532 Crosby Edger Serial 13003, 4″ x 32″, 3 blade 1movable, line shaft ready, Live infeed, outfeed, W/10″ x 7′ Waste Conveyor, Good Working Condition

533 Pallet Treatment Spray Booth Shop Built by Sunrise Machine(Dale IL), 22 pallet with automated outfeed, electric and air controlled, with catch basin that filters and reuses liquid, was used to mold treat pallets<br />

BID ONLINE 

https://bid.brightstarauctions.com/ui/auctions/53460

Wet Kit Cat Skidder Cat Cutter

Listing Contact

Bright Star Realty and Auctions
Phone: 574-825-0704
Email: lb@brightstarauctions.com

Share This Listing

11751 CR 12 · Middlebury IN 46540
Phone - (574) 825-0704

Get the inside track on upcoming auctions

Insider Information

Get the inside track on upcoming  auctions

Thank You!

Please check your email to confirm your subscription.

Scroll to Top