fbpx

3 Day Oak Valley Hardwoods Complete Liquidation Auction

8482 US 221 North, Marion, NC 28752
June 24, 2020, 10:00 am


3 Day Oak Valley Hardwoods Complete Liquidation Auction

Multiple Complete Large Sawmill Setups- Selling At One Auction

Optimizing Sawmill Complete Liquidation – Nicholson Ring Debarker – Baxley Trim Line with Hi-Tech J Bar Sorter – Baxley Optimizing Edger Select

June 24, 25 and 26 2020 10:00 am

8482 US 221 North, Marion, NC 28752

CLICK FOR ONLINE BIDDING AND PHOTOS

 

Terms: Payment in full day of sale. Cash, check, or major credit card. All items sell without reserve. 10% buyer’s premium applies to all onsite purchases and 13% to all offsite purchases. 2% convenience fee on all credit card purchases.

See brightstarauctions.com for online bidding and much more…

Contact Eugene: 260.350.8953 with auction questions

300 MONTGOMERY HOG 28″ MONTGOMERY HOG WITH 125 HP MOTOR; MODEL 960002, S/N 27

301 LOG DECK 3 STRAND 11’X25′ LOG DECK WITH ELECTRIC MOTOR AND DRIVE; STOP AND LOAD

302 DEBARKER 36” HMC DEBARKER WITH ELECTRIC MOTOR MODEL V2010 S/N 639

303 BELT CONVEYOR 33’X18″ BELT CONVEYOR WITH ELECTRIC 5 HP MOTOR DRIVE

304 CONCAVE BELT CONVEYOR 40’X24″ CONCAVE BELT CONVEYOR WITH ELECTRIC MOTOR

305 LOG DECK 35’X9’6″ 3 STRAND LOG DECK WITH HYDRAULIC STOP AND LOAD; ELECTRIC MOTOR AND DRIVE

306 LOG TURNER CORELY LOG TURNER; CONTROLS IN CAB

307 HYDRAULIC UNIT LOG TURNER HYDRAULIC PACK; 20 HP ELECTRIC MOTOR WITH HYDRAULIC PUMP

308 CORLEY CARRIAGE 16’X 48″ CORLEY 3 HEAD BLOCK LINEAL POSITION CARRIAGE; INCLUDES 2004 LEWIS CONTROL READY SCAN 1 SYSTEM WITH DYNA VISION HEADS, CAB AND CONTROLS

309 HYDRAULIC PACK 40 HP HYDRAULIC UNIT, MODEL AC-5-1-5AC, (S/N: 78700)

310 CORLEY SHOT GUN FEED 2004 CORLEY SHOT GUN FEED SMA280C, MODEL 01504FLF4UMQ WITH 150 HP TOSHIBA MOTOR (SN: 0402103511) INCLUDES CONTROLS IN SAW CAB

311 BAND MILL MCDONOUGH 7′ RIGHT HAND BANDMILL ; AIR STRAIN (SN: 84MA-164) 13″ FACE, 1 1/8″ THINKNESS RUNS 10″ BLADE; INCLUDES 5′ OFF BEARER BELT, THIS IS A VERY NICE UNIT!

312 MOTOR 250 HP TOSHIBA MOTOR UNDER BAND MILL/ FRAME#N587UZ; 1185 RPM; MODEL B2506FLF4BD

313 SLAB DUMP 13’X31″ BELT SLAB DUMP WITH OHIO GEAR REDUCTION DRIVE AND AIR CYLINDER

314 ROLL CASE 36”X15′ LIGNA MACHINERY ROLL CASE; 7 ROLLS;9″ LIVE ROLLS WITH AIR STOP, HEAVY DUTY!

315 ROLL CASE 25′ ROLL CASE W/ 9 ROLLS (24″X7″ ROLLS) WITH MORRIS GEAR MOTOR DRIVE; AIR STOP

316 GANG 2004 LIGNA 10X36″ TOP ARBOR, THIN CURF GANG WITH 14′ SELF POSITIONING INFEED CANT TURNER. (5 LIVE ROLLS, 3 POSITION CHAIN)INCLUDES (2) 200 HP MOTORS, CONTROLS IN CAB, MOTOR CONTROLS AS MARKED ON WALL, OUTFEED ROLL CASE, THIS MACHINE IS STILL A VERY NICE MASS PRODUCTION MACHINE!

318 TRANSFER DECK 4 STRAND 11’X11′ POP UP TRANSER DECK WITH STOP AND LOAD; ELECTRIC MOTOR AND GEAR BOX

319 CAB 60″X68″ CAB; CONTROLS NOT INCLUDED

320 EDGER NEW IN 2004 4”x36” LIGNA MACHINERY EDGER 36′ DEAD ROLLS, NO DRIVE; 19’X4″ TAILING DEVICE; 2 MOVABLE SAW HYD. SET WITH 60 HP ELEC. MOTOR

321 LASER LIGHTS (2) FOREST LINE LASER LIGHTS; BRACKET WITH EDGER

322 TRANSFER DECK 9’X11′ 4 STRAND TRANSFER DECK WITH ELECTRIC DRIVE; C55B ROOF TOP CHAIN

323 BELT CONVEYOR 25’X36″ BELT CONVEYOR BELT; GEAR MOTOR DRIVE

324 TRANSFER DECK 30’X11′ 4 STRAND TRANSFER DECK, C55D ROOF TOP CHAIN W/ 2 SETS OF 4 ARM AIR STOPS

325 TRANSFER DECK LIGNA 11’X14′ 9 STRAND TRANSFER DECK; C55 D ROOF TOP CHAIN

326 TRANSFER DECK 17’X11′ 4 STRAND TRANSFER DECK; H78B ROOF TOP CHAIN/ GEAR REDUCTION DRIVE

327 LUMBER DECK 21′ 3 STRAND LUMBER DECK (2 STRAND H78 ROOF TOP CHAIN;1 STRAND H78 CHAIN) GEAR REDUCTION DRIVE

328 DROP SAW TRIMMER 22′ CORLEY DROP SAW TRIMMER WITH 8 SAWS; 7.5 HP MOTOR ON SAWS WITH LASER LINE; 11′ -7 OUT DECK WITH 181X CHAIN

329 UNSCRAMBLER  4 STRAND UNSCRAMBLER, GOOD CONDITION, WITH ELECTRIC DRIVE

330 BELT CONVEYOR 25′ BELT CONVEYOR; 24″ BELT WITH DRIVE

331 GREEN CHAIN 110’X11′ 4 STRAND GREEN CHAIN WITH H78 CHAIN; 5 HP GEAR REDUCTION DRIVE

332 LUMBER CART 144″ X43″ LUMBER CART, 10″ WHEELS

333 LUMBER CART 147″X 43″ LUMBER CART, 10″ WHEELS

334 LUMBER CART 112″X43″ LUMBER CART, 10″ WHEELS

335 LUMBER CART 111″X43″ LUMBER CART, 10″ WHEELS

336 LUMBER CART 87″X43″ LUMBER CART, 10″ WHEELS

337 LUMBER CART 87″X43″ LUMBER CART, 10″ WHEELS

338 LUMBER CART 87″X43″ LUMBER CART, 10″ WHEELS

339 LUMBER CART 87″X43″ LUMBER CART, 10″ WHEELS

340 LUMBER CART 87″X43″ LUMBER CART, 10″ WHEELS

341 LUMBER CART 87″X43″ LUMBER CART, 10″ WHEELS

342 LUMBER CART 120″X88″ LUMBER CART, 8″ WHEELS

343 LUMBER CART 120″X88″ LUMBER CART, 8″ WHEELS

344 LUMBER CART 83″X48″ LUMBER CART, 11″ WHEELS

345 LUMBER CART 83″X48″ LUMBER CART, 11″ WHEELS

346 LUMBER CART 64″X88″ LUMBER CART, 8″ WHEELS

347 LUMBER CART 72″X88″ LUMBER CART, 8″WHEELS

348 LUMBER CART 120″X88″ LUMBER CART, 8″ WHEELS

349 LUMBER CART 120″X88″ LUMBER CART, 8″ WHEELS

350 LUMBER CART 72″X84″ LUMBER CART, 8″ WHEELS

351 LUMBER CART 72″X88″ LUMBER CART, 8″WHEELS

352 LUMBER CART 72″X88″ LUMBER CART, 8″WHEELS

353 LUMBER CART 120″X88″ LUMBER CART, 8″ WHEELS

354 LUMBER CART 120″X88″ LUMBER CART, 8″ WHEELS

355 LUMBER CART 64″X88″ LUMBER CART, 8″ WHEELS

356 BELT CONVEYOR 26’X14″ BELT CONVEYOR WITH DRIVE

357 BELT CONVEYOR 22’X24″ BELT CONVEYOR WITH 16″ BELT; GEAR REDUCTION DRIVE

358 CHIPPER PROGRESS MODEL 70 CHIPPER, ( SN: 001207) 8 KNIFE, BOTTOM DISCHARGE, NICE MACHINE!

359 MOTOR TECO-WESTINGHOUSE 250 HP MOTOR, 1785 RPM, 449TZ FRAME

359A SOLID STATE REDUCED VOLTAGE STARTER SQUARE D ALTISTART 46 250 HP SOLID STATE REDUCED VOLTAGE STARTER INCLUDES JUNCTION BOX

360 VIBRATING CONVEYOR 33’X18″ BOTTOM 10″ FLARED SIDES VIBRATING CONVEYOR INCLUDES 5′ FIBERGASS SECTION AND DRIVE

361 MDI METAL DETECTOR MDI METAL DETECTOR

362 DRAG CHAIN APPROX. 30′ DRAG CHAIN UNDER SHIPPER, H-78 DRAG CHAIN WITH 7.5 HP GEAR REDUCTION DRIVE

363 BELT CONVEYOR 32’X18″ BELT CONVEYOR GEAR REDUCTION DRIVE

364 SHAKER SCREEN 7’X7′ PROGRESS SHAKER SCREEN 2001; HYD. DRIVE, GOOD CON. SN 010031

365 BELT CONVEYOR 20’X10″ BELT CONVEYOR WITH GEAR MOTOR DRIVE

366 BELT CONVEYOR 20’X12″ BELT CONVEYOR WITH GEAR MOTOR DRIVE

367 CONVEYOR 30′ FINES CONVEYOR WITH H78 CHAIN

368 CHIP BIN ROYAL CHIP BIN, WITH HYD. UNIT, GOOD CON.

369 CHIP CONVEYOR APPROX. 80’X18″ CHIP CONVEYOR WITH H78 DRAG CHAIN

370 BELT CONVEYOR 70’X18″ BELT CONVEYOR INCLUDED ALL APRON PLATES ATTACHED; MOTOR AND DRIVE

371 BELT CONVEYOR 90′ BELT CONVEYOR/8″WIDE/ 6″ BELT GEAR MOTOR DRIVE

372 BELT CONVEYOR 45’X16″ BELT CONVEYOR WITH GEAR MOTOR DRIVE

373 SHAKER SCREEN 36″X18″ SAW DUST SHAKER SCREEN WITH DRIVE

374 DUST CONVEYOR 12’X12″ PLEATED SAW DUST CONVEYOR; GEAR MOTOR DRIVE

375 BARN SWEEP CONVEYOR CORNELL 35’X42 BARN SWEEP CONVEYOR

376 CONVEYOR APPROX. 100′ CONVEYOR WITH 110 LADDER BACK CHAIN

377 CHIP BIN ROYAL CHIP BIN, WITH HYD. UNIT, THIS IS A VERY NICE BIN.

378 AIR COMPRESSOR INGERSOL RAND SSR-3P75 AIR COMPRESSOR, 75 HP MOTOR (17704 HRS) CONTRLS AS MARKED

379 AIR COMPRESSOR SULLAIR LS-1250HACAC AIR COMPRESSOR WITH 50 HP MOTOR; CONTROLS ATTACHED TO DISCONNECT; NO SWITCHES

380 AIR TANK RESERVE AIR TANK

381 STAGE STARTER DISCONNECT TOSHIBA SIZE 5 STAGE STARTER 600 AMP DISCONNECT, 460 VOLT, 60 KVAR CAPACITOR

382 SOFT START ALLEN BRADLEY SOFT START FOR 150 HP MOTOR; NO DISCONNECT WITH CIRCUIT BREAKER

383 MOTOR CONTROL PANEL MOTOR CONTROL PANEL WITH 7.5 KVAR INCLUDES SHUT OFF CAPACITOR

384 ELECTRIC SHUT OFFS ELECTRIC SHUT OFFS AS MARKED (400-20 AMP)

385 STARTER SQUARE D SIZE 4 STARTER WITH BUILT IN 225 AMP DISCONNECT. NO WIRE OR CONDUIT

386 CAPACITOR BANK AUTOVAR 300 KVAR POWER CAPACITOR BANK

387 ELECTRIC PANELS ELECTRIC PANELS AS MARKED UNDER MILL

388 ELECTRIC PANELS ELECTRIC PANELS UNDER MILL AND EDGER

389 BAND SHARPENER ARMSTRONG #4 RH BAND SHARPENER (SN; 15924) INCLUDES CLAMP AND STANDS

390 DUST FILTER DUSTKOP DUST FILTER

391 HAMMERING STATION ARMSTRONG HAMMERING STATION INCLUDES ARMSTRONG #5 STRETCHER ROLL (SN: 15842) HAMMERING BLOCK, STAND AND ROLLERS INCLUDES ARMSTRONG WELDING CLAMP

392 BLOCK GRINDER MCDONOUGH GUIDE BLOCK GRINDER (SN: BDM655)

393 CHIPPER KNIFE GRINDER HANCHETT CHIPPER KNIFE GRINDER

394 DIP TANK MONTICELLO 20′ DIP TANK INCLUDES HYDRAULIC LIFT, SELF CONTAINED

500 LOG DECK 24’X12′ – 4 STRAND, 5 ARM STOP & LOADER; INCLUDES 1ST HORIZONTAL SUPPORT BEAM, 20 HP GEAR MOTOR DRIVE, BUILT TO LAST AND IN GOOD CON.

501 LOG TROUGH 28′ WITH 120 LADDER BACK CHAIN, W-ELECTRIC DRIVE

502 NICHOLSON RING DEBARKER  SIZE 35″ AC LEFT HAND, CHAIN FEED (SN N7631), MFG: 2010 SYDNEY, BRITISH COLUMBIA; INCLUDES 30 HP HYDRAULIC PACK, 100 HP TECO WESTINGHOUSE MOTOR, 30 HP MOTOR FOR INFEED, CONTROLS IN CAB AS MARKED, ONE OWNER! SERVICED BY NICHOLSON,  THIS IS RARE OPPORTUNITY!! VER NICE MACHINE.

502A ALLEN BRADELY STARTER 100 HP SMC-FLEX SOFTSTART STARTER CUTLER HAMMER, 150 AMP DISCONNECT. DOES NOT INCLUDED CABINET. NO WIRE OR CONDUIT INCLUDED

503 LOG TROUGH 29′ OUTFEED WITH 120 LADDER BACK CHAIN, 4 ARM LOG KICKER; S CONSTRUCTION DRIVE, 10HP GEAR MOTOR DRIVE

504 TIE BACK OF LOTS 500-503 TOGETHER WITH 10% RAISE

505 LOG DECK 39’X12′ 4 STRAND, STOP & LOADER WITH W82 CHAIN, 20HP MOTOR, FALK GEAR BOX, SUPPORTS TO 2ND HORIZONAL BEAM

506 HMC ROSSERHEAD DEBARKER 42” HEAVY DUTY, 60 HP ELECTRIC MOTOR; SELF CONTAINED HYDRAULIC SYSTEM, SLANT TRACK, CONTROL CHAIR IN CAB AS MARKED. NO SUPPORT STEEL, THIS DEBARKER IS IN VERY GOOD CONDITION.

506A ALLEN BRADLEY STARTER SIZE 3, CUTLER HAMMER 150 AMP DISCONNECT. NO WIRE OR CONDUIT INCLUDED.

507 LOG DECK 16’X11′ – 4 STRAND WITH W 82 CHAIN, GEAR MOTOR DRIVE. NO SUPPORT STEEL

508 LOG TROUGH 30′ WITH 120 LADDER BACK CHAIN, S DRIVE CONSTRUCTION, 10 HP GEAR MOTOR DRIVE. NO SUPPORT STEEL

509 FORTRESS LOG METAL DETECTOR 48″X48″; 23′ RENS FIBERGLASS SECTION WITH BELT, TAKES 48″ LOG, INCLUDES CONTROLS AS MARKED IN CAB, 10 HP GEAR MOTOR DRIVE. SUPPORT TO 1ST HORIZONTAL I BEAM

510 LOG TROUGH 55′ SALEM, 5 ARM REJECT LOG KICKER OUTSIDE OF BUILDING, 2 SETS OF 5 ARM LOG KICKER INSIDE BUILDING FOR 2 WAY LOG DISTRIBUTION. INCLUDES SLIDE PLATE AND BIN FOR REJECT LOGS. STEEL SUPPORT TO GROUND AS MARKED. EXTREMELY HEAVY DUTY AND IN EXCELLENT CONDITION.

511 BARK CONVEYOR 65′ X 18″, UNDER NICHOLAS DEBARKER WITH 110 LADDER BACK DRAG CHAIN, 10 HP GEAR MOTOR DRIVE. 6″ SUPPORT BEAMS ONLY

512 BARK CONVEYOR 32′, UNDER HMC DEBARKER WITH 110 LADDER BACK CHAIN

513 BARK CONVEYOR 80′ , WITH DUAL 110 LADDER BACK CHAIN, 20 HP GEAR MOTOR DRIVE. TO THE HOG 6″ SUPPORT LEGS ONLY

514 SALEM GRINDER 24’X30″ BOTTOM DISCHARGE INCLUDES HOPPER. NO MOTOR. NO SUPPORT STEEL.

515 TECO WESTINGHOUSE MOTOR 150 HP ELECTRIC. FRAME 445T, RPM 1775

515A ALLEN BRADLEY SOFT STARTER SMC-FLEX 150 HP SOFT START STARTER 600 AMP DISCONNECT. NO WIRE OR CONDUIT INCLUDED

516 DUAL TRAILER LOAD OUT SYSTEM WITH 36′ AUGER SYSTEM, AIR OPERATED DIVERTER SHOOT. SUPPORT TO GROUND, SUPPORT STEEL UNDER BARK SYSTEM

517 BARK CONVEYOR APPROX. 90′ WITH 110 LADDER BACK CHAIN, TO TRAILER LOAD SYSTEM, 20 HP GEAR MOTOR DRIVE

518 MISC. ELECTRIC BOXES AT HOG SYSTEM (2) 20 AMP, (2) 30 AMP, NO WIRE OR CONDUIT INCLUDED

519 SUPPORT STEEL UNDER HOG AND BARK CONVEYOR AS MARKED

520 SUPPORT STEEL UNDER DEBARKER SYSTEM, CATWALK AS MARKED, STEEL PLATES AS MARKED

521 RESERVE TANK RESERVE AIR TANK AT METAL DETECTOR

522 CAMERA SYSTEM WITH ## CAMERAS, VISIO DISPLAY

523 ALLEN BRADLEY ELECTRICAL SYSTEM IN SALEM BOX IN SAWYER’S CAB

524 ALLEN BRADLEY ELECTRICAL PANEL AS MARKED

525 SAWYER’S CAB (12’X8′) CLIMATE CONTROLLED AT DEBARKER

526 ALLEN BRADLEY ELECTRICAL MCC 800 AMP PANEL INCLUDES TRANSFORMER AND DISCONNECT BUT DOES NOT INCLUDES STARTERS AS MARKED

527 ALLEN BRADLEY POWER FLEX 700 VARIABLE FEED DRIVE

528 ALLEN BRADLEY STARTER AND DISCONNECT SIZE 2

529 CONTROL BOXES AS MARKED

530 STEEL BUILDING 8’X10′,  AT DEBARKER SHED

531 SAFETY SWITCHES (8) MISC SAFETY SWITCHES

532 HYDRAULIC PACK FOR PARTS WITH 30 HP MOTOR AND ELECTRICAL ATTACHED

533 OPEN SPAN BUILDING 30’X50′ PREFAB, OVER DEBARKER INCLUDES LIGHTS

534 LOG DECK 28’X12′ 3 STRAND HEAVY DUTY LOG DECK WITH CHAIN, 20 HP GEAR MOTOR DRIVE, 4 ARM STOP AND LOADER. SUPPORTS TO HORIZONTAL BEAM

535 SALEM BAR TYPE LOG TURNER (SN: 19910 04) INCLUDES 30 HP. SALEM HYDRAULIC PACK, CONTROLS IN CAB.

536 SALEM CARRIAGE 3  HEAD BLOCK LINEAL POSITION VERTICAL SLANT CARRIAGE (16′) (SN: 201541-05), MASS SETWORKS, SCANNER, , INCLUDES 60′ TRACK AND CRUY END BUMPERS, CABLE TIGHTENER. CLIMATE CONTROLLED SAWYERS CAB (12’X5′)

537 PARKER SSD ACDC CARRIAGE DRIVE MODEL AC690+, 242 HP MOTOR, INCLUDES CABLE AND ALL MOTOR CONTROLS.

538 SALEM BAND MILL 7′ RIGHT HAND VERTICAL SLANT BAND MILL (SN: R12798987); AIR STRAIN, 11″ FACE, 1 1/4 THICKNESS

539 WEG NEMA PREMIUM MOTOR 1191 RPM, 200 HP, FRAME 504, NO MOTOR CONTROLS INCLUDED

539A SQUARE D SIZE 6 STARTER

540 SLAB DROP 12″ X 32″, WITH 4 ARM AIR OPERATED EASE OFF

541 TIE BACK OF LOTS 536-540 WITH 10% RAISE

542 ROLLCASE 30′, WITH (11) 30’X9″ ROLLS, NO DRIVE, AIR STOP. (4) 4 ARM POP UP CHAIN ( BREAK CHAIN- NO SPROCKET)

543 ROLLCASE 20′, WITH (7) 30″ X9″ ROLLS, 7.5 HP GEAR MOTOR DRIVE WITH 6′ 4 STRAND POP UP TRANSFER, AIR STOP, GEAR MOTOR AND DRIVE

544 LOG DECK 12’X34′ 4 STRAND, 5 ARM STOP AND LOADER, 20 HP GEAR MOTOR DRIVE; SUPPORTS TO HORIZONTAL BEAM

545 COOPER SCRAGG END DOGGING SCRAGG, WITH COOPER COMPUTERIZED SETWORKS, (2) 150 HP MOTORS, CAB AND CONTROLS AS MARKED. INCLUDES (2) 56″ F7 SAWS ON MACHINE

545A SAW BLADE B7 BLADE FOR COOPER SCRAGG

545B SAW BLADE B7 BLADE FOR COOPER SCRAGG

545C SAW BLADE B7 BLADE FOR COOPER SCRAGG

545D SAW BLADE B7 BLADE FOR COOPER SCRAGG

545E SAW BLADE B7 BLADE FOR COOPER SCRAGG

546 (2) WEG SOFT START STARTERS SSW 07, STARTERS FOR 150 HP MOTOR

547 ALLEN BRADLEY ELECTRICAL 1200 AMP CENTER LINE MCC PANEL. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

548 ROLLCASE 14′, WITH 8 (74″X9″) ROLLS; 5 AIR OPERATED JUMP UP TRANSFER CHAINS (9′).

549 COOPER TRANSFER DECK 10’X14′, SLANT BED, GEAR MOTOR DRIVE.

550 ROLLCASE 17′ WITH 8 (54″X8″) SPIRAL ROLLS, GEAR MOTOR DRIVE. NO SUPPORT STEEL

551 ROLLCASE 24′, WITH 9 (30″X8″) (5 ROLLS ARE SPIRAL) ROLLS WITH 1 AIR STOP.GEAR MOTOR DRIVE

552 ROLLCASE 43′, WITH 15 (30″X9″) (10 ROLLS ARE SPIRAL) ROLLS GEAR MOTOR DRIVE

553 TRANSFER DECK 14’X9′ – 4 STRAND, WITH 81X CHAIN, GEAR MOTOR DRIVE<br /> 554 BELT CONVEYOR 23′, WITH 20″ BELT. GEAR MOTOR DRIVE

555 ROLLCASE 28′, WITH 10 (36″X8″) ROLLS, GEAR MOTOR DRIVE

556 SAW CRANE WITH PETERSBURG ELECTRIC WENCH

557 LUMBER TRANSFER DECK 22’X11′- 5 STRAND, WITH H78A ROOF TOP CHAIN. 3′- 5 STRAND TIPPLE, 5 HP GEAR MOTOR DRIVE. SUPPORT TO HORIZONTAL BEAM

558 LUMBER TRANSFER DECK 20′ – 5 STRAND, WITH H78 CHAIN, S DRIVE CONSTRUCTION, 5 HP GEAR MOTOR DRIVE. 4′- 5 STRAND POP UP TIPPLE DEVICE. SUPPORTS TO HORIZONTAL BEAM

559 SALEM LUMBER TRANSFER DECK 18’X11′ 4 STRAND, WITH H78 CHAIN, AIR STOP PINS, 4 ARM STOP AND LOADER, GEAR MOTOR DRIVE.

560 SALEM INFEED 13′ INFEED TO HORIZONTAL RESAW. 5 (34″X9″) ROLLS, 6′- 4 STAND TRANSFER DECK, POP UP CANT TURNER, 4 ARM CANT KICKER

561 SALEM BAND RESAW 6′, RIGHT HAND HORIZONTAL, (SN: 198096R04) FACE 11′, THICKNESS 1 3/8″; INCLUDES CONTROLS IN CAB AND CAB. 25 HP HYDRAULIC PACK

562 WORLD WIDE INDUSTRIAL ELECTRICAL MOTOR 200 HP, 449T, 891 RPM

562A ALLEN BRADELY OFT START SMC-FLEX SERIES B, MAX 250 HP, SOFT START STARTER WITH CUTLER HAMMER 600 AMP DISCONNECT. NO WIRE OR CONDUIT INCLUDED

563 SALEM OUTFEED 20′ OUTFEED ROLLCASE WITH 9 (36″X9″) ROLLS INCLUDES (5) 6′ AIR POP UP TRANSFER CHAIN, HYDRAULIC DRIVE, AND POP UP BOARD STOP

564 SALEM TRANSER DECK 12′ X 25′ 5- STRAND, WITH H78 CHAIN; 5 STRAND SCAPE ROLL INCLUDES 3 WAY SORT

565 BELT CONVEYOR 32′, WITH 30″ BELT, GEAR MOTOR DRIVE. INCLUDES LEGS TO GRADING

566 TIE BACK OF 557-565 WITH 10% RAISE

567 SALEM TRANSER DECK 16’X12′, GEAR MOTOR DRIVE. STEEL TO HORIZONTAL BEAM

568 BELT CONVEYOR 18′, WITH 30″ BELT, GEAR MOTOR DRIVE. STEEL TO HORIZONTAL BEAM

569 BELT CONVEYOR 40′, WITH 28″ BELT, GEAR MOTOR DRIVE. STEEL TO HORIZONTAL BEAM

570 SALEM TRANSFER DECK 27’X11′ 4 STRAND LUMBER, WITH H78 CHAIN, SMCYCLO GEAR MOTOR DRIVE

571 TRANSFER DECK 36’X11′ 4 STRAND, WITH H78B ROOF TOP CHAIN, SMCYCLO GEAR MOTOR DRIVE

572 TRANSFER DECK 31’X13′ 7-STRAND, WITH 81X CHAIN, GEAR MOTOR DRIVE

573 BAR TYPE UNSCRAMBLER 18’x 5′, WITH 18′ EVENENDER ROLLS

574 BAXLEY EQUIPMENT EDGER COMPANY HIGH SPEED OPTIMIZED EDGER SYSTEM TO INCLUDE BUT NOT LIMITED TO: 25′ INFEED LUMBER DECK SYSTEM WITH (7) 2′ JUMP UP TIPPLES, 7′ 8-STRAND TRANSFER WITH 3 SETS 8-ARM LUMBER STOPS, GEAR MOTOR DRIVE, 16′ 8-STRAND LUMBER TRANSFER WITH GEAR MOTOR DRIVE, EVENENDER ROLLCASE AND (7) (60″X6″) ROLLS, GEAR MOTOR DRIVE, BAXLEY LUMBER SCANNING SYSTEM WITH DYNAVISION LASER TECHNOLOGY, ALL SOFTWARE AND COMPUTERS. BAXLEY 20’HIGH SPEED INFEED WITH SHARP CHAIN, (4) HYD. HOLD DOWN ROLLS. BAXLEY HIGH SPEED 3 GUIDED SAW HIGH SPEED EDGER, 250 HP MOTOR. BAXLEY 22’X48″ OUTFEED BELT CONVEYOR, GEAR MOTOR DRIVE. 25 HP HYD. PACK, COOLING FAN FOR LASERS. NO MAIN MOTOR CONTROLS

574A ALLEN BRADLEY SOFT START STARTER SMC-FLEX SERIERS B 300 HP MAX, WITH CABINET INCLUDES GE 400 AMP SWITCH

574B ALLEN BRADLEY CENTER LINE MCC PANEL

574C SAWS AND SAW GUIDES

575 BELT CONVEYOR 18′, WITH 42″ BELT, SUMITOMO GEAR MOTOR DRIVE

576 TRANSFER DECK 42’X13′ 6-STRAND LUMBER, (5 STRANDS WITH C55D CHAIN), SMCYCLO GEAR MOTOR DRIVE

577 BELT CONVEYOR 32′, WITH 24″ BELT, SUMITOMO GEAR MOTOR DRIVE

578 SALEM TRANSFER DECK 13’X10.5′ 4-STRAND LUMBER, WITH H78 CHAIN, 4 AIR STOPS, GEAR MOTOR DRIVE

579 SALEM TRANSFER DECK 16’X11′ 4-STRAND,&nbsp; WITH H78B CHAIN, 4 BAR STOP AND LOAD, SMCLCLO GEAR MOTOR DRIVE

580 SALEM COMBINATION GANG/EDGER 10″, 18″ GANG SIDE, 32″ EDGER SIDE, 10″ TOP OF BLADE TO SHAFT. INCLUDES INFEED, CANT POSITIONING ROLLER, CANT TURNER, WITH LIVE LINE BAR, LASER LIGHT GUIDE SYSTEM (NO LASER LIGHTS) (SN: 69890-95) DOES NOT INCLUDE MAIN ARBOR MOTORS. DOES INCLUDE HYDRAULIC UNIT AND OILING SYSTEM

580A FILE ROOM SAW GUIDES FOR GANG SAW GUIDES FOR GANG AND MAINTENANCE PARTS IN FILE ROOM

581 LAHARCO LASER LIGHT (1)

582 LAHARCO LASER LIGHT (1)

583 150 HP MOTOR HIGH EFFICIENCY, 1775 RPM, 444T FRAME

584 BALDOR 150 MOTOR 150 HP ELECTRIC, 1780 RPM, 445T FRAME. NO MOTOR CONTROLS

585 ROLLCASE 26′, WITH 10 (25″X6″) ROLLS, 3 HP GEAR MOTOR DRIVE

586 TRANSFER DECK 15’X13′ 5-STRAND  (4 STRAND: H78B CHAIN, 1 STRAND H78 CHAIN), GEAR MOTOR DRIVE

587 SALEM UNSCRAMBLER 13′ WIDE, BAR CHAIN TYPLE, SMCYCLO GEAR MOTOR DRIVE

588 BELT CONVEYOR 22′, WITH 20″ BELT, SORT ON ARM, SMCLCLO GEAR MOTOR DRIVE

589 BELT CONVEYOR 22′, WITH 20″ BELT, SORT ON ARM, SMCLCLO GEAR MOTOR DRIVE

590 BUCHER HYDRAULIC PACK 12 VOLT HYDRAULIC POWER PACK INCLUDES 12 VOLT BATTERY. MODEL: M3551-0219 AND CONTROLS

591 PUSH BUTTON CONTROL PANEL (3) 30 AMP SAFETY SWITCHES

592 ROLLCASE 18′,&nbsp;&nbsp;8 (24″X7″ SPRIALROLLS, GEAR MOTOR DRIVE. NO SUPPORT STEEL

593 BELT CONVEYOR 34′, WITH 24″ BELT, SMCYCLO GEAR MOTOR DRIVE; 11′ PARTIAL INCLINE, STEEL SUPPORT TO FLOOR

594 BELT CONVEYOR 24′, WITH 30″ BELT, SMCYCLO GEAR MOTOR DRIVE. STEEL SUPPORT TO FLOOR

595 BELT CONVEYOR 34′, WITH 17″ BELT, SMCYCLO GREAR MOTOR DRIVE. STEEL SUPPORT TO FLOOR

596 TRANSFER DECK 34′ – 4 STRAND, WITH 81X CHAIN, 4 ARM STOP. GEAR MOTOR DRIVE

597 ROLLCASE 25′, CONVEYOR 12 (20″X9″ ROLLS. NO DRIVE

598 BREWER DOUBLE ARBOR GANG MODEL BR-81245-P (SN: 113090) WITH SIZER HEAD, CONTROL BOX. 12′ INFEED ROLLCASE 13(27″X5″) ROLLS (NO DRIVE). INCLUDES HYDRAULIC PACK, 10 HP MOTOR, 60 HP TOP ARBOR, 100 HP BOTTOM ARBOR, 50 HP SIZER HEAD. WITH MOTOR CONTROLS AS MARKED HELP

599 OUTFEED ROLLCASE 14′, WITH 8 (24″ X6″ ) ROLLS. GEAR REDUCTION DRIVE

600 SAWS AND SPACERS FOR GANG

601 SALEM BELT CONVEYOR 78′, WITH 29″ BELT. GEAR MOTOR DRIVE

602 LUMBER TRANSFER DECK 65’X13′ 6-STRAND, WITH C550 ROOF TOP CHAIN. SYCYCLO GEAR MOTOR DRIVE

603 POP UP TRANSFER DECK 24’X11.5′ 4-STRAND, WITH H78C CHAIN, S DRIVE CONSTRUCTION, 1 DRIVE, 1 SHAFT, NO TAIL SHAFT WITH DRIVE

604 POP UP TRANSFER DECK 18′ TRANSFER ROLLCASE WITH (36″X10″) ROLLS WITH 6′ 4 STRAND POP UP TRANSFER, 1 SHAFT, BREAK CHAINS AT 605

605 SALEM TRANSFER DECK 27’X11′ 4-STRAND, WITH H78 CHAIN AND (7) 3 ARM AIR STOPS, SENSOR EYES, S DRIVE CONSTRUCTION, GEAR MOTOR DRIVE, NO TAIL SHAFT

606 SALEM LIVE LINE BAR INFEED 20’WITH 7 (36″X10″) ROLLS. 4 ARM POP UP EVENENDER ROLLS TRANSFER, CANT TURNER, 4 POP UP CANT HOLDERS

607 SALEM LEFT HAND LINE BAR RESAW 6′ (SN L15286681) 11″ FACE, 1 1/8″ THICKNESS ON WHELE, 8′ LIVE LINE BAR, AIR STRAIN, NO MAIN MOTOR, NO HYDRAULIC SUPPLY

608 SALEM OUTFEED 18′ ROLLCASE WITH 7 (54″X9″) ROLLS. DUAL 4 STRAND POP UP TRANSFER CHAINS

609 150 HP MOTOR (NO TAG EXACT HP UNKNOWN; RUNS RESAW)

609A ALLEN BRADLEY SMC FLEX SOFT START STARTER SERIES A STARTER WITH CUTLER HAMMER 400 AMP DISCONNECT AND CABINET. MAXIMUM 200 HP

610 SALEM HYDRAULIC PACK 30 HP MOTOR AND 10 HP MOTOR WITH PUMP

611 TRANSFER DECK 6’X11′ 4 STRAND, GEAR MOTOR DRIVE. NO TAIL SHAFT

612 TRANSFER DECK 3’X10.5, WITH 3′ TIPPLE; GEAR MOTOR DRIVE

613 SALEM TRANSFER DECK 19′ X11L5′, 4 STRAND WITH (4) 4 ARM LUMBER STOPS WITH ELECTRIC EYES, 3′ TIPPLE, SMCYCLO GEAR MOTOR DRIVE

614 POP UP ROLLCASE 15′ WITH 6 (30″X9″) ROLLS, AIR POP UP. GEAR MOTOR DRIVE

615 ROLLCASE 16′, 7 (30″X9″) ROLLS, ELECTRIC EYES TO STOP, SMCYCLO GEAR MOTOR DRIVE

616 POP UP ROLLCASE 13′,&nbsp;WITH 6 (30″X9″) ROLLS, AIR CYLINDER POP UPS

617 TIE BACK OF LOTS 603-616 WITH A 10% RAISE

618 ROLLCASE 25′, WITH 9 (54″X7″) ROLLS. GEAR MOTOR DRIVE. STEEL TO FLOOR

619 TRANSFER DECK 24’X13′ 5-STRAND, WITH H78A ROOF TOP CHAIN. SMCYCLO GEAR MOTOR DRIVE

620 TRANSFER DECK 25’X13′ 5-STRAND TRANSFER DECK WITH H78A ROOF TOP CHAIN. SMCYCLO GEAR MOTOR DRIVE

621 TRANSFER DECK 25’X13′ 5-STRAND, WITH H78A ROOF TOP CHAIN. SMCYCLO GEAR MOTOR DRIVE

622 SALEM UNSCRAMBLER 14′ WIDE

623 CARBOTECH TRIM SAW INTERNATIONAL 22′ TRIM SAW MACHINE #10-214-110, 17 SAWS, WILL INCLUDE INFEED SECTION WITH 9’X22′ EVENER ROLLCASE

623A SALEM BELT CONVEYOR 24’x 30″ BELT, GEARMOTOR DRIVE, UNDER TRIM SAW

624 BAXLEY EQUIP. TRIMMER 22′ PASS TRIMMER AND HYDRAULIC PACK. DYNAVISION OPTIMIZER. EYES ON FEED, CONTROL BOX AT OPERATOR’S STATION, COMPUTERS/SOFTWARE IN OPERATOR’S OFFICE, COOLING BLOWER IN BASEMENT AS MARKED

625 LUCIDYNE TECHNOLOGIES GRADE MAR READER WITH CONTROLS IN ELECTRICAL ROOM, COMPUTER SYSTEM AS MARKED

626 TRANSFER DECK

627 INFEED OVERALL SECTION 42′ INCLUDES SALEM SPIRAL ROLLCASE WITH 6 (5’X12″) ROLLS; GEAR MOTOR DRIVE TO A 6′ TRANSFER LUG LOADER ; INCLUDES 26′ LUGGD TRANSFER DECK (NO TAILING SHAFT)

628 TIE BACK TOGETHER 623-627 WITH 10% RAISE

629 TRIM SAW OUTFEED 17’X14′, WITH 6 STRAND LUGGED TRANSFER 9’X7″ EVENER ROLLS, 3′ 8-ARM TIPPLE. INCLUDES HYDRAULIC PACK FOR EVENER ROLLS

630 BELT CONVEYOR 20′, WITH 29″ BELT. GEAR MOTOR CONTROLS

631 TRIM SAW BLADES (25) RESHARPENED ON WALL. 22″ BLADES

632 HI-TECH J-BAR SORTER 42 (4′) BINS. INCLUDES HYDRAULIC PACK, ROOF SYSTEMS ATTACHED, CONTROLS IN ELECTRIC ROOM AS MARKED, ATTACHED CATWALK

633 TRANSFER DECK 60′ 3-STRAND, WITH H78 CHAIN, S DRIVE CONSTRUCTION, SMCYCLO GEAR REDUCTION DRIVE

634 TRANSFER DECK 70′ 3-STRAND,&nbsp; WITH H78 CHAIN, S DRIVE CONSTRUCTION, SMCYCLO GEAR REDUCTION DRIVE

636 TIE BACK OF LOTS 628-635 WITH A 10% RAISE

645 FULGHUM 8 KNIFE 66′ 8 KNIFE HFVD (SN: FL-F1L-1702) INCLUDES 2 HP HYDRAULIC PACK FOR CYLINDER HOOD LIFT, DISCHARGE PIPE TO CYCLONE. NO MOTOR

645A CHIPPER KNIVES , HOLDERS AND ANVILS Will include all knives at and around chipper and inside box

646 TECO 300 HP MOTOR 1780 RPM. BELT STAYS WITH CHIPPER

647 ALLEN BRADLEY SOFT STARTER 300 HP STARTER NO WIRE OR CONDUIT INCLUDED

648 SALEM SHAKER SCREEN 8’X8′

649 8′ CYCLONE NO PIPE

649A PUSH BUTTON CONTROL STATION FOR CHIPER SYSTEM

650 BARN SWEEP CHIP CONVEYOR 44’X 6′ (26’FLAT, 18′ INCLINE); GEAR MOTOR DRIVE

651 CONCAVE BELT CONVEYOR 26′, WITH 36″ TWEETED BELT. INCLINE AND LEGS INCLUDED. GEAR REDUCTION DRIVE

652 CONCAVE BELT CONVEYOR 110′, WITH 36″ TWEETED BELT. GEAR REDUCTION DRIVE

653 CONCAVE BELT CONVEYOR 96′, WITH 24″ TWEETED BELT. GEAR REDUCTION DRIVE

654 US METAL WORKS CHIP BIN WITH HYDRAULIC PACK (LARGEST OF 3)

655 US METAL WORKS CHIP BIN NO HYDRAULIC PACK (MIDDLE)

656 US METAL WORKS CHIP BIN WITH HYDRAULIC PACK

657 CAROLINA BLOWER COMPANY BLOWER SIZE 70-6EHD (SN 5786) NO PIPE

658 DUST PIPE WITH STAND APRROX. 275′ OF 29″ DUST PIPE WITH STAND AND ALL ELBOWS TO CYCLONE

659 CYCLONE 12′, WITH AIR LOCK. NO PIPE

660 WEBSTER VIBRATING CONVEYOR 57′  24″ BOTTOM, 10″ FLARED SIDES. INCLUDES 12′ SCREEN SECTION, 5′ FIBERGLASS SECTION, 10 HP DRIVE MOTOR CONTROL, AND CHIPPER SHOOT

661 MDI METAL DETECTOR

662 WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL 60′, 24″ BOTTOM, 10″ FLARED SIDES. 7.5 HP MOTOR DRIVE

663 WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL 64′ WEBSTER VIBRATING CONVEYOR 24″ BOTTOM, 10″ FLARED SIDES. 10 HP MOTOR DRIVE

663A Webster Vibrating Conveyor 40′ x 24″ bottom, 10″ flared sides, 5 hp electric drive

664 WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL 55′, 24″ BOTTOM, 10″ FLARED SIDES. 15 HP MOTOR DRIVE

665 WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL 45′, 18″ BOTTOM, 10 ” FLARED SIDES. 3 HP MOTOR DRIVE

666 WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL 30′, 18″ BOTTOM, 7″ FLARED SIDES. 3 HP MOTOR WITH CUT OFF

667 WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL 70′, 24″ BOTTOM, 10″ FLARED SIDES. 7.5 HP DRIVE MOTOR WITH CUT OFF

668 WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL 20′, 24″ BOTTOM, 10″ FLARED SIDES. 7.5 HP DRIVE MOTOR WITH CUT OFF

669 WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL 60′, 24″ BOTTOM, 10″ FLARED SIDES. 7.5 HP MOTOR DRIVE WITH CUT OFF

670 WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL 40′,&nbsp; 24″ BOTTOM, 10″ FLARED SIDES. 7.5 HP MOTOR DRIVE

671 WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL 82′, 18″ BOTTOM, 10″ FLARED SIDES. 7.5 HP MOTOR DRIVE

672 WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL 69′, 24″ BOTTOM, 10″ FLARED SIDES. 7.5 HP MOTOR DRIVE

673 WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL 75′, 24″ BOTTOM, 10″ FLARED SIDES. 20 HP MOTOR DRIVE

674 WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL 50′, 24″ BOTTOM, 10″ FLARED SIDES. 7.5 HP MOTOR DRIVE

675 WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL 44′, 24″ BOTTOM, 10″ FLARED SIDES. 7.5 HP MOTOR DRIVE

676 SAW DUST CONVEYOR 13′, UNDER VERTICAL RESAW WITH 110 LADDER BACK CHAIN. GEAR MOTOR DRIVE

677 QUINCY AIR COMPRESSOR MODEL QSI500, 100 HP MOTOR, COOLING FAN, 200 AMP SAFETY SWITCH

678 SULLAIR AIR COMPRESSOR 20-150LACAC24KT WITH 150 HP MOTOR, 400 AMP SAFETY SWITCH

679 SULLAIR AIR COMPRESSOR MODEL VCC-2005 VARIABLE CAPACITY, 150 HP MOTOR, 400 AMP SAFETY SWITCH

680 PNEUMATICH HEATLESS AIR DRIER SYSTEM MODEL EH750

681 HANKISON AIR DRIER SYSTEM HHE-450 AIR DRIER SYSTEM UNDER CARRIAGE DRIVE

682 PATTON’S AIR DRIER SYSTEM MODEL P80

683 RESERVE AIR TANK

684 RESERVE AIR TANK UNDER COOPER SCRAGG

685 ALLEN BRADLEY CENTER LINE MCC PANEL, 1200 AMP NO WIRE OR CONDUIT INCLUDED

686 ALLEN BRADLEY POWER FLEX 700 VARIABLE SPEED DRIVE

687 SAF DRIVE INC SOFT START OPAL PRO SOFT START. MODEL MS6B-420-C-400 MAX 400 HP ** STARTER ONLY REMOVE FROM CABINET

688 GANG SAW MCCC CONSOLE INCLUDES ALLEN BRADLEY FRAME B SERIES, VARIABLE SPEED DRIVE. MULTIPLE SWITCHES AND CABINET

689 ALLEN BRADLEY CENTER LINE MCC PANEL 1000 AMP. NO WIRE OR CONDUIT INCLUDED

690 ALLEN BRADLEY CENTER LINE MCC PANEL 600 AMP NO WIRE OR CONDUIT INCLUDED

691 ALLEN BRADLEY CENTER LINE MCC PANEL 300 AMP NO WIRE OR CONDUIT INCLUDED

692 POWER FLEX 700 VARIABLE SPEED DRIVES (5) SERIES B

693 SIEMANS 2000 AMP DISCONNECTS MAIN ENTRANCE WITH DISCONNECTS TYPE SBA2020 400 VOLT

694 SIEMANS 2000 AMP DISCONNECTS MAIN ENTRANCE WITH DISCONNECTS TYPE SBA2020 400 VOLT

695 CAT WALK, STAIRS, CROSSOVERS, SAFETY FENCES ON MAIN SAWMILL FLOOR. DOES NOT INCLUDED ANY STEPS FROM SAWMILL FLOOR TO CONCRETE BASEMENT AREA

700 FILE ROOM-ARMSTRONG #4 RH BAND SAW SHARPENER INCLUDES CLAMPS AND STANDS (SN: 15608)

701 FILE ROOM-ARMSTRONG #4 RH BAND SAW SHARPENER INCLUDES CLAMPS AND STANDS

702 FILE ROOM-ARMSTRONG #4 RH BAND SAW SHARPENER INCLUDES CLAMPS AND STANDS

703 FILE ROOM DUST COLLECTOR

704 FILE ROOM DUST COLLECTOR

705 FILE ROOM DUST COLLECTOR

706 FILE ROOM ARMSTRONG BAND SAW FILING STATION INCLUDES ARMSTRONG STRETCHER ROLL, 12″ X 60″ HAMMER BLOCK, ARMSTRONG #10 WELDING CLAMP, BENCH WITH ROLLERS

707 FILE ROOM PRECISION 4 KNIFE CHIPPER KNIFE TUB TYPE GRINDER

708 FILE ROOM CHIPPER KNIFE MANTAINANCE BENCH WITH CONTENTS LESS ANY CHIPPER KNIVES

709 FILE ROOM DUST BLOWER 12″, 3 HP MTOOR, ALL PVC PIPE IN FILE ROOM

710 FILE ROOM SALEM SAW GUIDE GRINDING MACHINE (SN: 171360-96)

711 FILE ROOM BABBIT MOLD FOR CHIPPER KNIVES

712 FILE ROOM BABBIT MOLD FOR SAW GUIDES

713 FILE ROOM BABBIT POT AND LADLE

713A SALEM GUIDE GRINDER

714 FILE ROOM SHAFFER BOX FAN 54″X54″, VENTILATION EQUIPMENT BOX FAN

715 FILE ROOM HEATER 59″ PERSONAL HEATER

716 FILE ROOM NORTON 12″ BAND SAW GRINDING ROCKS

717 FILE ROOM AIR MASTER PEDESTAL FAN 30′

718 ARMSTRONG LEVELER (SN 2026B) OUTSIDE FILE ROOM

719 BAND SAW BLADES OUTSIDE FILE ROOM

720 BAND SAW BLADES OUTSIDE FILE ROOM

721 BAND SAW BLADES OUTSIDE FILE ROOM

722 BAND SAW BLADES OUTSIDE FILE ROOM

723 BAND SAW BLADES OUTSIDE FILE ROOM

724 BAND SAW BLADES OUTSIDE FILE ROOM

725 BAND SAW BLADES OUTSIDE FILE ROOM

726 BAND SAW BLADES OUTSIDE FILE ROOM

727 BAND SAW BLADES OUTSIDE FILE ROOM

728 BAND SAW BLADES OUTSIDE FILE ROOM

729 BAND SAW BLADES OUTSIDE FILE ROOM

730 BAND SAW BLADES OUTSIDE FILE ROOM

731 BAND SAW BLADES OUTSIDE FILE ROOM

732 10″ (3) WIDE BAND SAW BLADES FOR 7′ BAND MILL

733 10″ (2)WIDE BAND SAW BLADES FOR 7′ BAND MILL

734 10″ (2)WIDE BAND SAW BLADES FOR 7′ BAND MILL

800 48″ 3HD Salem Carriage Linear positioning, Saw Cab W/ controls, weighs aprox 25,000 lbs, Good Working Condition

801 Track & Frame Approx 60′ Track, 64″ center to center

802 Tyrone-Berry 285 Hydraulic Feed Tyrone-Berry 285 Shotgun Feed Carriage Drive with 150 hp Motor, 40′ Cylinders, No Pump! Good Condition

803 6′ Prescott vertical Band Saw 12″ blade, Weight Type, Working Condition

804 INOVEC Light Curtain Scanner System Comes with YieldMaster 386 control Box, Good Condition

805 Tie Back 800, 801, 802, 803, 804, Will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

806 7′ Prescott Resaw comes with Cab and controls, weight type blade tension, 10″ blade, No.218-M.S. 8737, Fair Condition

807 48′ Corley Edger 52″ x 12′ infeed, 12″ x 22′ Tailing Belt, Missing Blades, Good Working Condition

808 Spiral Roll Case 30″ x 8′ Live Roll Case, Heavy Duty, Good Working Con.

809 Roll Case 30″ x 52′ Live Roll Case, Heavy Duty, Good working con.

810 Transfer Deck 4-strand 10′ long x 12′ wide, electric drive 2hp motor, good working Condition

811 Transfer Deck 4-strand 20′ long x 10′ wide, no drive, working Condition

812 Log Deck 3-strand 34′ long x 10′ wide, 7 hp electric drive, Good Condion

813 Steel WalkWay 30′ x 20′ x 60″ high steel walkway 30″ x 48″ Platform with stairs, Good Condition

814 Steel WalkWay 30″ x 20′ x 48″ high, with two stairs, Good Condition

815 Belt Conveyor 36″ x 12′, no drive, working condition

816 Green Chain 4-strand ,100′ x 12′ Heavy Duty, electric drive, has been partly disassembled.

817 Roll Case 30″ x approx 20′, Live Roll Case, no drive, They are on the outside of the building, Good Condition

818 Bar Type Log Turner Good Working Condition

819 Wheel Loader L120C Volvo BM, hrs unknown, engine does not work loss compression, Transmission was still good when it was running, rough condition

2000 1997 TRANSCRAFT ALUMINUM FLAT BED TRAILER MODEL: EAGLE W2 48X96, VIN: ITTF4820000622

2001 TAYLOR “LITTLE RED” THD100 FORKLIFT: SN: P31023 10,000 LB CAPACITY, 4′ FORKS, SIDE SHIFT, SEE THRU MAST, PERKINS DIESEL ENGINE, SHOWING 1057 HRS, BIG TIRES ON FRONT (13.00-24) BACK (9.00-20)

2002 1990 RAVENS 48′ X96″ ALUMINUM FLAT BED TRAILER SPEAD AXLE, (1R1F04826LE900219) 11R22.5 TIRES

2003 PITTS LOG TRAILER (MFG: 6-99) MODEL LT-40-B DOUBLE BUNK (1PELT40XXP990712) 11R22 TIRES

2004 1973 FRUEHAUF CLOSE TOP DUST TRAILER (HPR472095) FIXED TANDEM, 295/75R 22.5 TIRES

2005 FORD F350 SUPER DUTY SERVICE TRUCK STAND TRANSMISSION, GRANNY LOW, 7.3 POWER STROKE DIESEL ENGINE, 4 DOOR, 189,999 MILES

2006 2008 FREIGHTLINER CL120 TRACTOR WITH COLUMBIA SLEEPER  (1FUJA6CV78L41179 ) EDEN FULLER 10 SPEED TRANSMMSION. 700,335 MILES, DETROIT DIESEL MERCEDES (OM460LACID781)

2007 NISSAN 90 FORKLIFT MODEL WGF03A40V; CHASSIS: WGF03-920713, 9,000 LB FORKLIFT, TRIPE MAST, SIDE SHIFT FORKS, 4′ FORKS. DIESEL ENGINE, DUAL HARD TIRES ALL THE WAY AROUND, 6382 HOURS

2008 NISSAN 11000 FORKLIFT (DF05N50V) DUAL TIRES, 11,000 CAPACITY. (SN: DF05000430), 8′ FORKS, SIDE SHIFT, 8.25.15 PNEUMATIC TIRES, AHOQINF “22 HOURS, DIESEL ENGINE, ENCLOSED CAB, SEE THROUGH TRIPLE MAST<br /> 2009 CATERPILLAR DPL40 9000 FORKLIFT &nbsp;9,000 LB FORKLIFT, DIESEL ENGINE, 4′ FORKS, SIDE SHIFT, SEE THROUGH MAST, DUAL PNEUMATIC TIRES, (SN: 3CN90542) 2434 HOURS

2010 HYSTER 300XL FORKLIFT 30,000 LB (SN D19D23304), 8′ FORKS, SIDE SHIFT, SEE THROUGH MAST, DUAL TIRES, PERKINS DIESEL, ENCLOSED CAB, 12.00-20 DUAL TIRES (80/FRONT: 10/BACK)

2011 SET OF BALE FORKS QUICK COUPLE BALE FORK (SN 80835)

2012 KOMATSU WA250PT-5) TOOL CARRIER (SN70289) ARTICULATING LOADER WITH QUICK COUPLE ATTACHMENT, KOMATSU DIESEL ENGINE, JRB QUICK COUPLE LUMBER FORKS WITH BALE CLAMP

2013 2000 FORD F650 SUPER DUTY TRUCK (3FDWF65H3YMA03246), CAT DIESEL ENGINE, (1650) MAXON TOMMY LIFT, AIR COMPRESSOR WITH HONDA GAS ENGINE, BOB CAT 250 ACDC WELDER, 75R.22.5 TIRES

2014 2000 STERLING DAY CAB TRUCK (SN: 2FZHCYB1AF41762) FULLER TRANSMISSION, DISREPAIR, CUMMINS DIESEL

2015 LINDE H136 FORKLIN (SN: 35H051011136) 8′ FORKS, SIDE SHIFT, SEE THROUGH MAST, SELF POSITIONING, CUMMINS ENGINE DR109, DUAL 12R20 FRONT TIRES, 12.00 BACK TIRES

2016 VOLVO QUICK COUPLE FORKS (80153)

2017 CAT 924K ARTICULATING RUBBER TIRE LOADER (SN: C8N32278), 7011 HOURS, QUICK COUPLE

2018 FRUEHAUF 40′ OPEN TOP VAN TRAILER

2019 BRUTE HUSKY LX175 KNUCKLEBOOM LOADER ON SELF PROPELLER CARRIER, LEVER CONTROLS (SN: 859299), JOHN DEERE DIESEL MOTOR, HYDRAULIC PACK FOR BUCK SAW, CONTINUOUS ROTATING GRAPPLE

2020 KOMATSU L120 ARTICULATING LOADER RUBBER TIRE LOADER (SN: VCEL120HJ0S632242) 4117 HOURS, KILL SWITCH, FULLY ENCLOSED, 23.5R25 TIRES, CLIMATE CONTROL CAB

2021 VOLVO MODEL 82041 7 METER BUCKET (SN: 7024-00420) QUICK COUPLER

2022 QUICK COUPLE “R” LOG FORK WITH BALE CLAMP

2025 1993 PEERLESS 45′ WALKING FLOOR TRAILER VIN: 1PLE045283PG53021) WITH KEITH WALKING FLOOR 11R24.5 TIRES (5-70%, 3-10%-20%) ALUMINUM RIMS

2026 2006 INNOVATIVE 45′ OPEN TOP CHIP VAN (VIN: 1292A45266T199047) MESS SWING OUT DOOR, ALUMINUM FLOOR, MODEL 505-45, 11R24.5 TIRES STOCK # V12, TIRES: (2-70%, 6-20%)

2027 2006 INNOVATIVE 45′ OPEN TOP CHIP VAN (VIN: 1Z92A452136T19118)) MESS SWING OUT DOOR, ALUMINUM FLOOR, MODEL 505-45, 11R24.5 TIRES (FRONT 4-70%, REAR: 20%) , V14

2029 2006 INNOVATIVE 45′ OPEN TOP CHIP VAN (SN: 1Z92A45246T199046) (VIN:1Z92A45246T199046) ) MESS SWING OUT DOOR, ALUMINUM FLOOR, MODEL 505-45, 11R24.5 TIRES STOCK # U12, TIRES: FRONT AXLE 4: 50%, REAR: 2-10%, 2-50%)

2030 300 CATERPILLAR MODEL DP135 (SN: 5DP00127) 30,000 LB FORKLIFT 16,934 HOURS, SIDE SHIFT, 7’3″X8″ FORKS, CAT DIESEL ENGINE, 12:00 TIRES, DUAL TIRES ON FRONT, RIGHT SIDE TIRES 50%, LEFT SIDE 20%)

2031 CATERPILLAR 950 RUBBER TIRE LOADER (SN: CAT950KCR4A0214) 23.5R25 TIRES-50%, HOURS UNKNOWN, QUICK COUPLE

2032 6′ BALE TYPE LOG FORKS

2033 BUCKET WITH QUICK COUPLE

2034 TAYLOR MODEL REP-2505 (SN: 5-HS-21948) 25,000 LB CAPACITY, 8’X12″ WIDE FORK, SIDE SHIFT  SEE THRU MAST, MACHINE SHOWS 19RS, SO WILL ESTIMATE 10,091 HRS. CUMMINS ENGINE (OIL CAP MISSING) DUAL FRONT TIRES 10: 00-20 (1-90%, 1-30%, 2-10%) REAR TIRES (1-100%, 1-80%)

2035 HYSTER H1100XL 10,000 LB FORKLIFT (SN: F006016061) (NO PLATE FOR SN) 6’X6″ FORKS MACHINE SHOWING 981 HOURS. RERKINS MODEL 1004 ENGINE DUAL FRONT TIRES 8-25-15 (20%)

2036 TAYLOR MODEL TE250M (SN; H5-21723) 25,000 LB CAPACITY 7’X8″ FORKS SIDE SHIFT SEE THRU MAST, MACHINE SOWES 2357 HRS, CUMMINS ENGINE DUAL 10: 20 TIRES ON FRONT(2 FRONT: 80%, OTHER 2 20%) (REAR: 60%)

2037 2012 FREIGHTLINER CASCADIA TRUCK 2012 FREIGHTLINER CASCADIA TRUCK, (VIN: 1FUJGLDR6CBL5976), 10 SPEED TRANSMISSION, DOUBLE BUNK SLEEPER, DETROIT DD15 DIESEL

2038 2005 VOLVO TRUCK 2005 VOLVO TRUCK, (VIN: 4V4NC9GG35N386620), 10 SPEED

2039 2013 FORD XL 150 4X4 PICK UP 2013 FORD XL 150 4X4 PICKUP, AUTO TRANSMISSION, GASS ENGINE

2040 HYSTER 120FT FORTIS FORKLIFT HYSTER 120FL FORTIS FORKLIFT, TURBO DIESEL (SN: U0005V04367P) TRIPLE MAST, SIDE SHIFT, 8’FORKS, DUAL TIRES 2516 HRS.

2041 HYSTER H50XM FORKLIFT HYSTER H50XM FORKLIFT (SN: 177B48997B) TRIPLE MAST, SIDE SHIFT, 4′ FORKS, PROPANE, PNEUMATIC TIRES

2042 NEW SHOP BUILT 8’X20′ DIP TANK WITH LIFT NEW SHOP BUILT 8X20′ DIP TANK WITH LIFT. NO HYD. PACK

2043 2008 KALMAR MODEL DEC 180-6 18,000 LB CAPACITY FORKLIFT 2008 KALMAR MODEL DEC 180-6 18,000 LB CAPACITY FORKLIFT. (SN: T43105.0269), TRIPLE SEE THRU MAST, 8′ SELF POSITIONING FORKS, DUAL TIRES, CUMMINS DIESEL ENGINE, 4942 HRS.

2044 NISSAN 100 MODEL FO455V 10,000 LB FORKLIFT NISSAN 100 MODEL FO455V 10,000 LB FORKLIFT (SN: AN29B80042), 6′ FORKS, SIDE SHIFT, TRIPLE MAST, PROPANE, PNEUMATIC TIRES, 7250 HRS

2045 USNR MODEL F305 30,000 LB FORKLIFT USNR MODEL F305 30,000 LB FORKLIFT (SN: CE3050170010409) 8′ SELF POSITIONING FORKS, SEE THRU MAST, 5356 HRS. CUMMINS DIESEL ENGINE, DUAL TIRES

2046 TAYLOR 250 E-250M BIG RED FORKLIFT TAYLOR 250 E-250M BIG RED FORKLIFT, (SN: S-H5-1906) 8′ FORKS, SIDE SHIFT, DUAL TIRES, DETROIT ENGINE

Listing Contact

Bright Star Realty and Auctions
Phone: 574-825-0704
Email: lb@brightstarauctions.com

Share This Listing

11751 CR 12 · Middlebury IN 46540
Phone - (574) 825-0704

Get the inside track on upcoming auctions

Insider Information

Get the inside track on upcoming  auctions

Thank You!

Please check your email to confirm your subscription.

Scroll to Top