fbpx

Oak Valley Hardwoods Complete Plywood Manufacturing Auction

68 Snowbird Rd Robbinsville, NC 28771
August 28, 2020, 9:45 am
Owner: Oak Valley Hardwoods


Oak Valley Hardwoods Complete Plywood Manufacturing Auction

August 28, 2020 9:45 AM

68 Snowbird Rd Robbinsville, NC 28771

ONLINE BIDDING

https://bid.brightstarauctions.com/ui/auctions/52249

Winning bidders have 30 days to remove the larger equipment.

Winning bidders of boiler and buildings have 120 days to remove.

Rigging is the responsibility of the buyer and all riggers will need to be properly insured.

Rigging and load-out may be scheduled by calling Zach Kittrell at 931.224.0699.

ONLINE BIDDING

https://bid.brightstarauctions.com/ui/auctions/52249

200 TREE LENGTH LOG DECK 25′ 4 STRAND TREE LENGTH LOG DECK, 24′ WIDE HAS 2 INDEPENDENT DRIVE; H78 CHAIN, AND STOP AND LOADER SYSTEM, SUPPORTS TO THE GROUND

201 ENDWISE LOG TROUGH 40′ ENDWISE LOG TROUGH, 110 LADDER BACK CHAIN, HYDARULIC DRIVE; STEEL SUPORTS TO GROUND

202 BREWCO SLASHER SAW BREWCO SLASHER SAW 60″ INSERTED TOOTH SAW, CLIMATE CONTROL CAB AND CONTROLS, 40 HP ELECTRIC MOTOR, 2 HYDRAULIC OPERATED LOG HOD DOWNS ON INFEED; 2 HYSTRAULIC OPERATED LOG HOLD DOWNS ON OUTFEED, INCLUDES 12′ OUTFEED ENDWISE LOG TROUGH WITH 119 LADDER BACK CHAIN. HYDRAULIC DRIVE, NO HYDRAULIC SUPPLY.

202a 6’X8′ REJECT LOG TABLE 6’X8′ REJECT LOG TABLE

202B 15’X12″ WASTE CONVEYOR; GEAR MOTOR DRIVE 15’X12″ WASTE CONVEYOR; GEAR MOTOR DRIVE

202C 10 HP HYDRAULIC SUPPLY UNIT 10 HP HYDRAULIC SUPPLY UNIT

203 CATWALK SECTION 4’X20′ CATWALK SECTION AT MERCHANDISING SYSTEM

204 TIE BACK OF 200-203 WITH 10% RAISE TIE BACK OF LOTS 200-203 WITH A 10% RAISE

205 HOURGLASS ENDWISE LOG TROUGH 38′ HOURGLASS ENDWISE LOG TROUGH WITH (27) 20″ WIDE HOURGLASS ROLLS, NO HYDRAULIC SUPPLY, HYDRAULIC DRIVE, STEEL SUPPORTS TO THE GROUND

206 LOG KICKER SYSTEM 4′ LOG KICKER SYSTEM. HYDRAULIC DRIVE ROLL CASE, CHAIN LIFT SYSTEM. NO HYDRAULIC SUPPLY. STEEL SUPPORTS TO THE GROUND

207 ENDWISE LOG CONVEYOR 7′ ENDWISE LOG CONVEYOR; (6) 20″X8″ HOURGLASS ROLLS, HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

208 LOG KICKER SYSTEM 4′ LOG KICK SYSTEM, HYDRAULIC DRIVE ROLL CASE, CHAIN LIFT SYSTEM, NO HYDRAULIC SUPPLY, STEEL SUPPORTS TO THE GROUND

209 ENDWISE LOG TROUGH 7′ ENDWISE LOG CONVEYOR; (6) 20″X8″ HOURGLASS ROLLS, HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

210 ROLLCASE 11′ ROLLCASE HYDRAULIC LIFT LOG KICKERS, 48″ LOGS

211 HYDRAULIC PACK 15 HP HYDRAULIC PACK

212 TIE BACK OF 205-210 WITH 10% RAISE TIE BACK OF LOTS 205-210 WITH 10% RAISE

213 LOG DECK 48’X3′ 2 STRAND LOG DECK WITH H78 CHAIN. HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

214 HAUL UP LOG DECK 7’X3′ 3 STRAND HAUL UP LOG DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

215 ROTATE GOLD LOG DEBARKER 57″ ROTATE GOLD LOG DEBARKER VALVE CONTROLS AT OPERATOR STATION; 7.5 KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX30132M-4)/11KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX3-163M-4) , SELF CONTAINED HYDRAULIC PACK, ELECTRIC CONTROLS ATTACHED

216 HOURGLASS ROLLCASE 6′ HOURGLASS ROLL CASE WITH (4) 20″X10″ ROLLS, LOG KICKER AND STEEL PLATE, GEAR REDUCTION DRIVE

217 VENEER BACK PEELER 4′ VENEER BACK PEELER (59″) INCLUDES 6’X4′ INFEED LOG FEED, PUSH BUTTON CONTROLS, MOTOR CONTROLS ATTACHED

218 VENEER STACKING SYSTEM VENEER STACKING SYSTEM TO INCLUDE 22’X4′ BELT CONVEYOR, 4′ WIDE VENEER PRESS, 13′ TRANFER BELT CONVEYOR TO VENEER STACKER, 11’X4′ VEENER STACKER, ELEVATOR WITH CHAIN OUTFEED COMPLETELY SELF CONTAINED WITH ALL CONTROLS ATTACHED

219 TIE BACK LOTS 213-218 WITH 10% RAISE TIE BACK OF LOTS 213-218 WITH A 10% RAISE

220 LOG DECK 48’X3′ 2 STRAND LOG DECK WITH H78 CHAIN. HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

221 HAUL UP LOG DECK 7’X3′ 2 STRAND HAUL UP LOG DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

222 ROTATE GOLD LOG DEBARKER 57″ ROTATE GOLD LOG DEBARKER VALVE CONTROLS AT OPERATOR STATION; 7.5 KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX30132M-4)/11KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX3-163M-4) , SELF CONTAINED HYDRAULIC PACK, ELECTRIC CONTROLS ATTACHED

223 HOURGLASS ROLLCASE 6′ HOURGLASS ROLL CASE WITH (4) 20″X10″ ROLLS, LOG KICKER AND STEEL PLATE, GEAR REDUCTION DRIVE<br /> 224 VENEER BACK PEELER 4′ VENEER BACK PEELER (59″) INCLUDES 6’X4′ INFEED LOG FEED, PUSH BUTTON CONTROLS, MOTOR CONTROLS ATTACHED

225 VENEER STACKING SYSTEM VENEER STACKING SYSTEM TO INCLUDE 22’X4′ BELT CONVEYOR, 4′ WIDE VENEER PRESS, 13′ TRANFER BELT CONVEYOR TO VENEER STACKER, 11’X4′ VEENER STACKER, ELEVATOR WITH CHAIN OUTFEED COMPLETELY SELF CONTAINED WITH ALL CONTROLS ATTACHED

226 TIE BACK LOTS 220-225 WITH 10% RAISE TIE BACK OF LOTS 220-225 WITH A 10% RAISE

227 HYDRAULIC PACK 15 HP HYDRAULIC PACK

228 LOG DECK 48’X8′ 4 STRAND LOG DECK WITH H78 CHAIN WITH HYDRAULIC DRIVE, NO HYDRAULIC SUPPLY<br /> 229 HAUL UP LOG DECK 7’X8′ HAUL UP DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

230 LOG DEBARKER 8′ ROTATE GOLD LOG DEBARKER VALVE CONTROLS AT OPERATOR STATION; 7.5 KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX30132M-4)/11KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX3-163M-4) , SELF CONTAINED HYDRAULIC PACK, ELECTRIC CONTROLS ATTACHED

231 ENDWISE LOG TROUGH 10′ ENDWISE LOG TORUGH (5) 20″X10″ HOURGLASS ROLLS

232 VENEER BACK PEELER 8′ VENEER BACK PEELER (105″) INCLUDES 6’X4′ INFEED LOG FEED, PUSH BUTTON CONTROLS, MOTOR CONTROLS ATTACHED

233 XUANJIN MACHINE CO. LTD VENEER STACKER XAUNJIN MACHINE CO. LTD VENEER STACKER (9’X5′) TO INCLUDE 22′ INFEED BELT SYSTEM COMPLETELY SELF CONTAINED, CONTROLS ATTACHED

234 HYDRAULIC PACK 20 HP HYDRAULIC PACK

235 TIE BACK OF 228-234 WITH 10% RAISE TIE BACK OF LOTS 228-234 WITH A 10% RAISE

236 BELT CONVEYOR 65′ BELT CONVEYOR WITH 24″ PLEATED BELT, GEAR REDUCTION DRIVE

237 BELT CONVEYOR 55′ BELT CONVEYOR WITH 18″ BELT, GEAR REDUCTION DRIVE

238 CATWALK SECTION (2) CATWALK SECTIONS AT DEBARKER

239 CONTROL PLATFORMS 52″X32″X63″ CONTROL PLATFORMS

239A CONTROL PLATFORMS 52″X32″X63″ CONTROL PLATFORMS

239B CONTROL PLATFORMS 52″X32″X63″ CONTROL PLATFORMS

240 HIGH PRECISION MACHINE TOOL KNIFE GRINDER HIGH PRECISION MACHINE TOOL KNIFE GRINDER HAS (2) 52″X7″ MAGNETIC HOLDING PLATES, OVERALL WIDTH 162″, SELF CONTAINED MOTOR CONTROLS

241 SPARE KNIVES FOR PEELER (2) 106″ SPARE KNIVES FOR PEELER

242 SPARE KNIVES FOR PEELER (2) 59″ SPARE KNIVES FOR PEELER

243 ELECTRIC PANEL ELECTRIC PANEL TO INCLUDE 300 AMP DISCONNECT, (2) SIZE 4 STARTERS, (2) WEG SOFT START SSW-03 PLUS, MISC CUT OFFS. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

244 DISCONNECT SQUARE D 800 AMP DISCONNECT. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

245 CONTROL PANEL CONTROL PANEL TO INCLUDE (5) 30 AMP DISCONNECTS, (5) SIZE 2 STARTERS. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

246 VENEER DRYER 4 TRAY VENEER DRYER, CONTROLS, INCLUDES INFEED LOADING SYSTEM; OUTFEED BELT CONVEYOR, STEAM PIPE TO FIRST CUT OFF AT MAIN PIPE SYSTEM. BLOW POPE TO ROOF ONLY

247 VENEER DEFECT MACHINE VENEER DEFECT MACHINE

248 VENEER DEFECT MACHINE VENEER DEFECT MACHINE

249 VENEER DEFECT MACHINE VENEER DEFECT MACHINE

255 HESHAN JIEDING MACHINERY COMPANY 4′ DOUBLE SIDED GLUE SPREADER HESHAN JIEDING MACHINERY COMPANY 4′ DOUBLE SIDED GLUE SPREADER, ***NEW! NEVER INSTALLED!!***

256 HESHAN JIEDING MACHINERY COMPANY AUTOMATIC SUCTION CUP INFEED HESHAN JIEDING MACHINERY COMPANY 4′ AUTOMATIC SUCTION CUP INFEED ***NEW! NEVER INSTALLED!!***

300 LUMBER BREAK DOWN SYSTEM LUMBER BREAK DOWN SYSTEM TO INCLUDE 25’X11′ 4 STRAND PACKAGE DECK, TULSA WINCH GEAR REDUCTION DRIVE; 3 ARM, 7 ‘ BREAK DOWN CHAIN LIFT WITH TULSA WINCH DRIVE, 10′ X11′ LUMBER TRANSFER DECK, 81X CHAIN; 25′ STICK REMOVAL CONVEYOR WITH 10″ BELT DRIVE, NO MOTOR CONTROLS

262 HESHAN JIUDING MACHINERY COMPANY 8′ DOUBLE SIDED GLUE SPREADER HESHAN JIEDING MACHINERY COMPANY 8′ DOUBLE SIDED GLUE SPREADER ***NEW! NEVER INSTALLED!!***

301 BELT CONVEYOR BELT CONVEYOR

263 HESHAN JIEDING MACHINERY COMPANY 8′ AUTOMATIC SUCTION CUP INFEED HESHAN JIEDING MACHINERY COMPANY 8′ AUTOMATIC SUCTION CUP INFEED ***NEW! NEVER INSTALLED!!***

302 CONTROL STATION CONTROLS CONTROL STATION CONTROLS

266 HESHAN JIEDING MACHINERY COMPANY COLD PRESS MACHINE (SPLIT TYPE) HESHAN JIEDING MACHINERY COMPANY COLD PRESS MACHINE (SPLIT TYPE) ***NEW! NEVER INSTALLED!!***

303 LUMBER DECK 16′ X11′ 4 STRAND LUMBER DECK WITH C55B ROOF TOP CHAIN, MOTOR REDUCTION DRIVE

272 HESHAN JIEDING MACHINERY COMPANY 40 LAYER HOT PRESS (PARTIALLY INSTALLED) HESHAN JIEDING MACHINERY COMPANY 40 LAYER HOT PRESS (PARTIALLY INSTALLED) ***NEW!***

304 HMC DOUBLE END TRIMMER HMC 16′ DOUBLE END TRIMMER MODEL ET10 (SN: 347-98), 24″ SAWBLADES

273 HESHAN JIEDING MACHINERY COMPANY PLYWOOD COOLING CONVEYOR HESHAN JIEDING MACHINERY COMPANY PLYWOOD COOLING CONVEYOR ***NEW! NEVER INSTALLED!!***

305 BELT CONVEYOR 22′ BELT CONVEYOR WITH 20″ BELT UNDER TRIMMER

275 HESHAN JIEDING MACHINERY COMPANY ASH SCRAPER HESHAN JIEDING MACHINERY COMPANY ASH SCRAPER ***NEW! NEVER INSTALLED!!***

306 BELT CONVEYOR 10′ BELT CONVEYOR 28″ BLET GEAR MOTOR DRIVE FROM TRIMMER

276 HESHAN JIEDING MACHINERY COMPANY FULLY AUTOMATIC ROLLER-TRIM SAW MACHINE HESHAW JIEDING MACHINE COMPANY 4′ FULLY AUTOMATIC ROLLER-TRIM SAW MACHINE ***NEW! NEVER INSTALLED!!***

307 GREEN CHAIN DECK 70’X8′ 4 STRAND GREEN CHAIN WITH 81X CHAIN WITH TAIL SPROCKET SHAFT, GEAR MOTOR DRIVE

277 HESHAN JIEDING MACHINERY COMPANY 8′ TRIM SAW MACHINE HESHAN JIEDING MACHINERY COMPANY 8′ FULLY AUTOMATIC ROLLER TRIM SAW MACHINE ***NEW! NEVER INSTALLED!!***

308 GREEN CHAIN DECK 73’X8′ 4 STRAND GREEN CHAIN WITH 81X CHAIN, GEAR REDUCTION DRIVE, NO HEAD SHAFT, 36″ LUMBER PULL ROLLS

285 SUPER SOUND 2 HEAD SANDING MACHINE MMNH5613DR SUPER SOUND 2 HEAD SANDING MACHINE ***NEW! NEVER INSTALLED!!***

309 TIE BACK LOTS 300-308 WITH 10% RAISE TIE BACK OF LOTS 300-308 WITH A 10% RAISE

310 LUMBER CART 15’X52″ LUMBER CART

310A LUMBER CART 15’X52″ LUMBER CART

310B LUMBER CART 16’X52″ LUMBER CART

310C LUMBER CART 15’X52″ LUMBER CART

310D LUMBER CART 15’X52″ LUMBER CART NO WHEELS

310E LUMBER CART 15’X52″ LUMBER CART

311 LUMBER CART 14’X40″ LUMBER CART

311A LUMBER CART 14’X40″ LUMBER CART

311B LUMBER CART 14’X40″ LUMBER CART

311C LUMBER CART 14’X40″ LUMBER CART

311D LUMBER CART 14’X40″ LUMBER CART

311E LUMBER CART 14’X40″ LUMBER CART

311F LUMBER CART 14’X40″ LUMBER CART

311G LUMBER CART 14’X40″ LUMBER CART

311H LUMBER CART 14’X40″ LUMBER CART

311I LUMBER CART 14’X40″ LUMBER CART

312 CONTROL CENTER CONTROL CENTER UNDER BREAK DOWN SYSTEM

313 DISCONNECT 200 AMP SQ. D DISCONNECT

325 MEREEN JOHNSON MULTI GANG RIP SAW MEREEN JOHNSON 3300 DCS MULTI GAND RIP SAW (SN: MJ5688) WITH SLANT BED FEED SYSTEM (5282 HOURS), ELECTRICAL CONTROLS ATTACHED

326 SPARE ARBORS SAWS AND SPACERS SPARE ARBOR SAWS AND SPACERS

327 MATTISON 404 RIP SAW MATTISON 404 RIP SAW (MODEL: 3J1934M004), 20 HP MOTOR, TYPE: CMP45

328 BLACK AND DECKER MAGNETIC DRILL PRESS BLACK AND DECK 3/4″ MAGNETIC DRILL PRESS (SN: 3060154)<br /> 329 GARDNER DENVER AIR COMPRESSOR GARDNER DENVER 10 HP TANK MOUNT AIR COMPRESSOR WITH CONTROLS AS MARKED

330 GENERAL PHEUMATICS REFRIGERATED COMPRESSED AIR DRYER GENERAL PNEUMATICS REFREGERATED COMPRESSED AIR DRYER, (MODEL TKF1000A), CUT OFF CONTROLS ATTACHED

331 DISCONNECT SQ. D 200 AMP DISCONNECTED

332 DRY KILN #1,CONTROLS AND DOOR DRY KILN #1, CONTROLS, DOOR

333 DRY KILN #2, CONTROLS AND DOOR DRY KILN #2, CONTROLS, DOOR

334 DRY KILN #3, CONTROLS AND DOOR DRY KILN #3, CONTROLS, DOOR

335 DRY KILN #4, CONTROLS AND DOOR DRY KILN #4, CONTROLS, DOOR

336 DRY KILN #5, CONTROLS AND DOOR DRY KILN #5, CONTROLS, DOOR

337 DRY KILN #6, CONTROLS AND DOOR DRY KILN #6, CONTROLS, DOOR

338 DRY KILN #7, CONTROLS AND DOOR DRY KILN #7, CONTROLS, DOOR

339 DRY KILN # 8, CONTROLS AND DOOR DRY KILN #8, CONTROLS, DOOR

340 DRY KILN #9, CONTROLS AND DOOR DRY KILN #9, CONTROLS, DOOR

341 SAMPLE OVEN SAMPLE OVEN

342 HURST WASTE FIRE BOILER HURST 400 HP WASTE FIRE BOILER, CONTROLS, AUTOMATIC FEED SYSTEM (SN: HYB2925/150) (BUILT: 2003, JOB #110) COMPLETELY GONE THROUGH

343 INDUSTRIAL BOILER SYSTEM INDUSTRIAL BOILER SYSTEM, RAM TYPE FEEDER INCLUDES CONTROLS AS MARKED, 15 HP MOTOR<br /> 344 VIBRATING CONVEYOR 25’X20″ VIBRATING CONVEYOR WITH 7″ SIDES

350 DIP TANK 10’8″X20’2″X6’4″ LUMBER DIP TANK WITH COMPLETE HYDRAULIC SYSTEM

351 IRVINGTON MOORE PACKAGE DECK 29’X14′ IRVINGTON MOORE 4 STRAND PACKAGE DECK (1) NEW STRAND IS ON GROUND TO BE PUT ON, RUFNER 10 HP GEAR REDUCTION DRIVE

352 IRVINGTON MOORE HAUL UP DECK 11’X14′ IRVINGTON MOORE 4 STRAND HAUL UP DECK, GEAR REDUCTION DRIVE, STEEL SUPPORT TO GROUND

353 IRVINGTON MOORE UNSCRAMBLER 5′ IRVINGTON MOORE PADDLE TYPE UNSCRAMBLER WITH EVENENDER ROLLS, STEEL SUPPORTS TO THE GROUND

354 IRVINGTON MOORE GRADING STATION IRVINGTON MOORE GRADING STATION WITH 11′ 6 STRAND DECK, H78B ROOF TOP CHAIN, SLAT EVENENDER DEVICE, GRADING TABLE, 2 WAY SORT SYSTEM AND PUSH BUTTON CONTROLS

355 IRVINGTON MOORE REJECT BOARD CONVEYOR IRVINGTON MOORE 20′ REJECT BOARD CONVEYOR WITH 24″ BELT UNDER GRADING STATION<

356 IRVINGTON MOORE LUMBER DECK IRVINGTON MOORE 32’X12′ 4 STRAND LUMBER DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

357 IRVINGTON MOORE LUMBER STACKER IRVINGTON MOORE 7′ 4 ARM CHAIN TYPLE LUMBER STACKER TO INCLUDE STICK PLACING STATION, LUMER ELEVATED ROLLCASE,HYDRAULIC PACK, ALL DRIVES AND CONTROLS AS MARKED

358 ROLLCASE 55′ ROLL CASE WITH (21) 88″ ROLLS, 2 ARE INDEPENDENTLY POWERED WITH GEAR REDUCTION DRIVES<br /> 359 STICK DECK 45′ 3 STRAND STICK DECK WITH DRIVE

360 TIE BACK LOTS 351-359 WITH 10% RAISE TIE BACK OF LOTS 351-359 WITH A 10% RAISE

361 FIRE POOF CABINET 43″X65″ FIRE PROOF CABINET

362 (3) PEDESTAL FANS (3) PEDESTAL FANS

363 HANGING BOX FAN 3’X3′ HANGING BOX FAN

364 JACKSON & CHURCH WASTE OIL BURNING FLEX AIR FURNACE JACKSON & CHURCH FLEX AIR FURNACE WASTE OIL BURNING, INCLUDES TANK OUTSIDE

365 ROLL AROUND LADDER 4 STEP 3′ ROLL AROUND LADDER

366 PALLET JACK 5500 LB. PALLET JACK, 20″ WIDE

367 WOOD CRATE AND CONTENTS WOOD CRATE AND CONTENTS

368 VERTICAL BARREL DOLLY VERTICAL BARREL DOLLY

369 HORIZONTAL BARREL DOLLY HORIZONTAL BARREL DOLLY

370 CONTENTS OF OFFICE CONTENTS OF OFFICE, 2 DESK, 6 CHAIRS, REFRIGERATOR, FILE CABINET, MICROWAVE, SAMSUNG WALL AIR CONDITIONER

371 WASTE BIN 4’X4’X4′ WASTE BIN

372 B-23934 SPROCKETS (9) B-23934 SPROCKETS

373 METAL CABINET WITH CONTENTS METAL CABINET WITH CONTENTS

374 METAL CABINET WITH CONTENTS METAL CABINET WITH CONTENTS

375 LADDER (2) LADDERS

376 SMOKERS CEASE CONTAINER OUTSIDE LOG OFFICE/ (1) OUTSIDE MAIN OFFICE SMOKERS CEASE CONTAINER OUTSIDE LOG OFFICE (1) OUTSIDE MAIN OFFICE

377 BUILDING 40’X150′ PREFAB METAL BUILDING WITH 20′ SIDES, 3 ROLL UP DOORS, 2 WALK IN DOORS

377A ELECTRIC PANEL ELECTRIC PANEL AS MARKED TO INCLUDE (2) 200 AMP DISCONNECTS, (3) 100 AMP DISCONNECTS (2) MISC ELECTRICAL BOXES, )1) BREAKER BOX (1) 37.5 KVA TRANSFORMER

378 FUEL TANK FUEL TANK OUTSIDE OF GRADING STATION BUILDING

381 CONCRETE LUMBER BUNK ALL CONCRETE LUMBER BUNKS ON YARD

382 CONTAINER LOADING RAMP CONTAINER LOADING RAMP

383 LUMBER BUNK TOPPERS LUMBER BUNK TOPPERS

384 ALL LOGS ON LOG YARD ALL LOGS ON LOG YARD

385 CONVEYOR 3 STRAND-4 ARM STOP AND LOADER WITH 10′ ROLLER CHAIN, NO DRIVE

386 LOG LOADER 18′ – 6 STRAND LOG LOADER WITH GEAR MOTOR DRIVE- 2 STRANDS NOT ATTACHED

387 TRANSFER DECK (3) 5′ TRANSFER DECKS

388 LOG TROUGH 22′ ENDWISE LOG TROUGH 10″ 110 LADDER BACK CHAIN/HYDRAULIC DRIVE

389 CATWALK AN MISC STEEL CATWALK AND MISC STEEL AS MARKED

390 LOG TROUGH 15′ ENDWISE LOG TROUGH DUAL H78 CHAIN, GEAR REDUCTION DRIVE

391 LOG TROUGH 3 SECTIONS OF 30′ ENDWISE LOG TROUGH, NO CHAIN, GEAR REDUCTIONS DRIVE

392 3 HEAD SANDER TIMES SAVER 3 HEAD SANDER, MODEL 852-6CR (SN: 19349)

393 FULGUM CHIPPER 60″ FULGUM CHIPPER, 6 KNIFE HORIZONTAL FEED, TOP CHARGE, MISSING COVER, NO MOTOR

394 FULGUM CHIPPER 60″ FULGUM CHIPPER, 6 KNIFE HORIZONTAL FEED, TOP DISCHARGE (SN: F1.F1L.1101) 75 HP MOTOR

395 BELT CONVEYOR 12′ X24″ BELT CONVEYOR THAT FED GRINDER, GEAR MOTOR DRIVE

396 BELT CONVEYOR 21’X18″ BELT CONVEYOR WITH GEAR MOTOR DRIVE

397 PEEL AND STICK ROOFING PALLET OF LIBERTY SBS SELF ADHERING “PEEL AND STICK” ROOFING (18) PALLET WITH 12 BOXES, (1) PALLET WITH 10 BOXES *** 100 FEET PER BOX*** COLOR: BLACK

398 AIR COMPRESSOR GARDNER DENVER 200 HP ELECTRA SCREW TYPE AIR COMPRESSOR. MODEL EDP99C, (SN: S062586)

399 AIR COMPRESSOR SULAIR LS-25 20 HP SCREW TYPE AIR COMPRESSOR, (HOURS: 5685)

400 AIR DRYING SYSTEM 2009 PNEUMATECH AIR DRYING SYSTEM: TYPE: AD1250

401 METAL SHELF AND CONTENTS IN BACK OF BUILDING METAL SHELF AND CONTENTS IN BACK OF BUILDING

402 METAL SHELF AND CONTENTS IN BACK OF BUILDING METAL SHELF AND CONTENTS IN BACK OF BUILDING

403 METAL SHELF AND CONTENTS IN BACK OF BUILDING METAL SHELF AND CONTENTS IN BACK OF BUILDING

404 METAL SHELF AND CONTENTS IN BACK OF BUILDING METAL SHELF AND CONTENTS IN BACK OF BUILDING

405 CONTENTS OF ROOM NOT ALREADY SOLD CONTENTS OF ROOM NOT ALREADY SOLD

406 CONTENTS OF ROOM CONTENTS OF ROOM IN BACK OF BUILDING

450 BLOWER CAROLINA MODEL 40″ BLOWER, 40 HP MOTOR CONTROLS ATTACHED

451 KOGER BLOWER MODEL CW0360 KOGER BLOWER MODEL CW-60 WITH 40 HP MOTOR

452 AUTOMATIC FEEDER SYSTEM DUAL 4 CHAIN AUTOMATIC FEEDER SYSTEM, 2 GEAR MOTOR DRIVES UNDER THE CYCLONE

453 DUST HOUSE CARTER DAY 10′ DUST HOUSE INCLUDES AIR LOCK

454 BLOWER 44″ BLOWER, 50 HP MOTOR, CONTROLS ATTACHED

455 AUTOMATIC FEEDER SYSTEM 4 CHAIN TYPE AUTOMATIC FEEDER SYSTEM WITH 2 GEAR MOTOR DRIVES

456 (2) CYCLONES (2) CYCLONES (LEFT SIDE) ON TOP OF SILO

457 (2) CYCLONES (2) CYCLONES (RIGHT SIDE) ON TOP OF SILO

458 DUST PIPE ALL DUST PIPE AT SILOS AND ON GROUND EXCLUDING ANY ON THE MAIN BUILDING. MOSTLY 15″ DIAMETER

459 FUEL TANK AND PUMP FUEL TANK AND PUMP IN BACK NEAR SILO

460 WASTE OIL TANK WASTE OIL TANK NEAR SILOS

461 FORKLIFT FORKS 42″ FORKS BEHIND PLANT NEAR SILO

462 WASTE LOADING BIN WASTE LOADING BIN, DUAL 10′ AUGER SYSTEM TO INCLUDE BIN, AUGER, STAR LOADING SYSTEM

463 BLOWER 44″ KOGER BLOWER

500 ELECTRICAL SQUARE D H-VL LOAD CURRENT INTERRUPTER SWITCH, NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

501 ELECTRICAL SIEMENTS ELECTRIC PANEL AS MARKED W/ 400 AMP DISCONNECT, 200 AMP DISCONNECT (4) AMP DISCONNECT AND (1) CONTROL BOX NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

502 ELECTRICAL SQUARE D 600 AMP DISCONNECT NEAR END OF DRYER NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

503 ELECTRICAL MOTOR CONTROL PANEL TO INCLUDE RATIOTROL AC INVERTER ACE F SERIES NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

504 ELECTRICAL SQUARE D TYPE 3, 2000 AMP MAIN DISCONNECT (SN: 333)/SQUARE D 2000 AMP DISCONNECT OUTSIDE OF OFFICE DOOR IN BUILDING NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

505 ELECTRICAL ERMCO E-PAD 1500 KVA TRANSFORMER OUTSIDE OF OFFICE NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

600 OFFICE- BOOK SHELF WOODEN BOOK SHELF IN NURSES STATION

601 OFFICE- METAL CABINET METAL CABINET IN NURSES STATION

602 OFFICE-SAFE SAFE IN NURSES STATION

603 OFFICE- CHAIRS 3 CHAIRS IN NURSES STATION

604 OFFICE- TABLE, FILING CABINET 4′ TABLE AND 5 DRAWER METAL HORIZONTAL FILING CABINET IN NURSES STATION

605 OFFICE-TABLE 4′ TABLE IN NURSES STATION

606 OFFICE – CHAIRS 2 WOODEN CHAIRS IN NURSES STATION

607 OFFICE- PRINTER/COPIER BROTHER MFC-L2740DW COPIER/PRINTER (NOTE ATTACHED STATES: MAKES COPES DOESN’T SCAN OR FAX. 3 BOXES OF TONES, EXTRA DRUM

608 OFFICE-SUPPLIES MISC OFFICE SUPPLIES INCLUDES HP DESKJET 1000

609 OFFICE-MEDICAL SUPPLIES MISC. MEDICAL SUPPLIES TO INCLUDE STRETCHER, CRUTCHES, HAZARD DISPOSAL BIN WITH RED DISPOSAL BAGS, AND MISC BANDAGES

610 OFFICE – CLEANING SUPPLIES MISC CLEANING SUPPLIES, MOP BUCKET, CLEANING SUPPLIES

611 OFFICE- PING PONG TABLE PING PONG TABLE

612 OFFICE CONFERENCE TABLE 9′ CONFERENCE TABLE

613 OFFICE- HEARING TESTNG BOOTH HEARING TESTING BOOTH

614 OFFICE 5 CHAIRS 5 BLACK LEATHER ROLLING CHAIRS WITH ARMS

615 OFFICE 2 CHAIRS 2 CREAM CLOTH HIGH BACK CHAIRS

616 OFFICE 2 CHAIRS 2 MAROON CLOTHER CHAIRS WITH WOODEN ARMS

617 OFFICE 2 END TABLES 2 WOODEN END TABLES WITH DRAWERS

619  OFFICE DÉCOR TO INCLUDE ART WORK AND PLANTS

620 OFFICE- 4 DRAWER SOFA TABLE 4 DRAWER SOFA TABLE IN ENTRANCE HALL

621 OFFICE- CONTENTS OF OFFICE CONTENTS OF OFFICE, 2 CHAIRS, 3 ROLLING CABINETS, ENTERTAINMENT CENTER, DESK, CREDENZA, TABLE, 2 BOOKSHELVES

622 OFFICE- SAFETY EQUIPMENT SAFETY EQUIPMENT TO INCLUDED HARD HATS AND SIGNS

623 OFFICE- TAPE/ CONTAINER TIES TAPE AND CONTAINER TIES

624 OFFICE- CONTENTS OF OFFICE CONTENTS OF FIRST OFFICE IN HALL TO INCLUDE 2 CHAIRS, METAL FILING CABINET, 2 BOOKSHELVES AND DESK

625 OFFICE-CONTENTS OF OFFICE CONTENTS OF 2ND OFFICE IN HALL TO INCLUDE OAK DESK, CREDENZA, BOOK SHELF, AND 3 CHAIRS

626 OFFICE- CONTENTS OF OFFICE CONTENTS OF 3RD OFFICE IN HALL TO INCLUDE WOODEN DESK, AND 2 CHAIRS

627 OFFICE- CONTENTS OF OFFICE CONTENTS OF LAST OFFICE IN HALL TO INCLUDE WOODEN DESK, WOODEN FILE CABINET, BOOK SHELF, AND 3 CHAIRS

902 HYSTER MODEL 300 FORKLIFT HYSTER MODEL 300 30,000 LB CAPACITY FORKLIFT, 8′ FORKS, SHOWING 2181 HOURS, MOTOTROL TRANSMISSION, SIDE SHIFT, SEE THROUGH MAST, HAS FORKS FOR LESS GROUND LEVEL, DUAL TIRES ON FRONT TIRES, MAYBE 40%, PERKINS DIESEL ENGINE, FULLY ENCLOSED CAB, 13’6″ MAST

903 CATERPILLAR 174 MODEL DP80 CATERPILLAR 175 MODEL DP80, 17,500 LB CAPACITY FORKLIFT (SN: 132B-00030) 15,092 HOURS, SIDE SHIFT, SEE THROUGH MAST, 12’6″ MAST, MITSUBISHI DIESEL ENGINE, 2 NEW BATTERIES, DUAL TIRES ON FRONT, 2 FRONT TIRES RIGHT & LFT 80% THE OTHER 4 TIRES 10%, 7′ FORKS

904 LINDE MODEL H160 FORKLIFT LINDE MODEL H160 16,000 KG CAPACITY FORKLIFT, 15,662 HOURS, 8’ FORKS, SELF POSITIONING FORKS, PERKINS ENGINE, SEE THROUGH MAST, DUAL FRONT TIRES, FRONT TIRES 20%, REAR TIRES 80%. FULLY ENCLOSED CABLE. WOULD NOT START PROBLEM UNKNOWN

912 CAT V330C FORKLIFT CAT V330C FORKLIFT (AT OLD BOILER SYSTEM) 33,000 LB CAPACITY, SIDE SHIFT, SEE THROUGH MAST, DUAL FRONT TIRES, (2,642 HRS) NO FORKS, CAT 208 ENGINE, WAS TOLD TO HAVE FUEL INJECTION ISSUES WILL NOT START

913 2004 CHEVY VAN 2004 CHEVY ASTRO AWD VAN (VIN: 1GNEL19X14B124236) BACK SEATS ARE MISSING, A/C, CRUISE, AM/FM/CD PLAYER, UNKNOWN MILES, POWER LOCKS, FRONT TIRES: 60-70%, REAR 20%

ONLINE BIDDING

https://bid.brightstarauctions.com/ui/auctions/52249

Listing Contact

Bright Star Realty and Auctions
Phone: 574-825-0704
Email: lb@brightstarauctions.com

Share This Listing

11751 CR 12 · Middlebury IN 46540
Phone - (574) 825-0704

Get the inside track on upcoming auctions

Insider Information

Get the inside track on upcoming  auctions

Thank You!

Please check your email to confirm your subscription.

Scroll to Top