fbpx

Central Pennsylvania Late-Model Woodworking Equipment

6098 Glen Hope Blvd. Glen Hope PA 16645
November 27, 2020, 9:00 am
Owner: Kitko

Central Pennsylvania Late-Model Woodworking Equipment and Real Estate At Absolute Auction

Date: Friday November 27, 2020  9:00 AM

BID ONLINE

https://bid.brightstarauctions.com/ui/auctions/55506

Address: 6098 Glen Hope Blvd. Glen Hope PA 16645

This Auction is scheduled to go ahead as planned. Bidders may attend and bid in person.

Pennsylvania’s new restrictions have an explicit exemption for work-based travel. We assume everyone attending the auction is doing so for work-based purposes, business etc.

Online bidding is still available but if bidders prefer, they are welcome to attend in person. Please bring a mask if you do attend. Mask-wearing and social-distancing will be encouraged.

Terms: Cash, check, or major credit card. 10% buyer’s premium applies to onsite bidders. Additional 3% premium applies to online and phone purchases. 2% credit card fee.

Free lunch for onsite bidders!

Sellers: Kitko Woodworking

See brightstarauctions.com for much more…

Auctioneer’s Note: Late model optimizing equipment- and lots of it. This will be a two-ring auction much of the day! Plan to come and bring a friend.

Open houses: Contact Eugene: 260-350-8953

No minimums, No Reserves!

Sanders, Planers, Grinders, Gluers!

This is only an early listing. There is much more!

1001 Steel Building 70′ x 200′ steel structure building, 22′ sidewall down to 16′ sidewall, includes center wall, 4 bays with overhead doors 20′ wide 14′ high, very good building

1002 Steel Building 70′ x 100′ steel structure building, 25′ sidewalls down to 19′ sidewalls, open on 2 sides, does not include center wall, very good condition

1003 Steel Building 70′ x 175′ newer steel structure insulated building, 21′ sidewalls (sits on 2′ concrete wall) 1 overhead door, very good building

1 4 Aluminum Shovels

2 2 Snow Shovels

3 8 Push Brooms

4 Brooms, Fork, Scraper etc

5 8 Square Shovels

6 Metal Utility Cart On Wheels Includes tools, chain, sockets, buckets etc.

7 Steel Work Table 6′ x 4′ with notch, includes variety of tools.

8 Wooden Work Bench 30″ x 51″, includes variety tools, caliper

9 Wooden Work Bench 35″ x 72″, includes belt sander, 8″ puller, torque wrench, tool box full of wrenches.

10 2 Senco Staple Guns Q25, N17, includes staples.

11 Wooden Work Bench 36″ x 36″, wrenches, dial caliper, metal band crimpers.

12 Anvil

13 Skid of Plastic Wrap Approx. 24 rolls, includes hand tools.

14 Skid of ABC Fire Extinguishers 15 large, 3 small.

15 Skid of ABC Fire Extinguishers 20 large, 4 small.

16 Skid of Hydraulic Oil etc. Fiber aluminum roof coating.

17 Electric Motor etc.

18 Belts, Bearings etc.

9 Belts, Bearings, Chain etc.

20 Skid of Wire

21 Electric Motor, Belts, Sprockets etc.

22 4 Bulb Inspection Light.

23 45″ Floor Fan

24 24″ Fan for Blower New

25 Mac Battery Charger Model MCM50A, serial # F3630.

26 Marcus MTC Transformer Serial # 943-586

27 56″ Rollers

28 Skid of Boston Gear Boxes Ratio 20

29 5 hp Electric Motor, Transmission etc.

30 Bench Grinder, Electric Motor

31 Toshiba Motor 10 hp, frame 215T, brand new

32 Elektro Drive Motor 15 hp, brand new.

33 Baldor Motor 7 1/2 hp, frame 2137.

34 Lincoln Electric Motor 75 hp, frame 364TS.

35 Skid of Electric Motors

36 Spool of Wire 600 V, 16 AWG 8/C, 105c dry and 60c water resistant.

37 Skid of Misc. 12″ 14″ 24″ webs for conveyors, roll of cardboard.

38 Redi Spreader Good condition.

39 Steel Stop For Chopsaw

40 BT Pallet Jack 5000 lbs. 6′ forks

41 BT Pallet Jack 5000 lbs. 4′ forks.

42 BT Pallet Jack 5000 lbs. 4′ forks.

43 BT Pallet Jack 5000 lbs. 4′ forks

44 BT Pallet Jack 5000 lbs. 4′ forks.

45 TCM Pallet Jack 4′ forks.

46 TCM Pallet Jack 4′ forks.

47 Eagle 55 Pallet Jack 4′ forks.

48 Pallet Jack 2200 lbs. 4′ forks, needs work.

49 BT Pallet Jack 5000 lbs. 4′ forks.

50 BT Pallet Jack 5000 lbs. 4′ forks.

51 BT Pallet Jack 5000 lbs. 4′ forks.

52 BT Pallet Jack 5000 lbs. 4′ forks.

53 Pallet Jack 500 kg. 4′ forks, 20″ wide.

54 Eagle 55 Pallet Jack 500 kg. 4′ forks, 20″ wide.

55 2 Wheel Barrel Cart

56 Wagon With Barrel

57 Barrel Cart

58 Barrel Cart

59 Barrel Cart

60 Barrel Cart

61 Barrel Cart

62 Banding Cart Includes battery powered crimper.

63 Banding Cart Includes battery powered crimper.

64 Banding Cart Includes crimper.

65 Banding Cart Includes crimper.

66 Metal Banding 3 rolls, with bucket of clips.

67 Band Unroller

68 Plastic Banding 3 boxes.

69 Machine Part.

0 Tire and Tarp

71 Barrels 8 total, 1 filled with limestone.

72 Variety of Wooden Profiles

73 Skid of Glue Ups Ash, Birch, Red Oak etc

74 Skid of Glue Ups Red Oak, variety of sizes

75 Skid of Table Legs 35″ square, 2 3/4” x 37″ spindles.

76 Variety of Table Legs .

77 Skid of Pedestals 38″ long, various sizes.

78 Table Legs 3 skids.

79 Table Legs 2 skids.

80 Skid of Lumber Variety of glue ups, some could be used for table tops.

81 Pedestals 2 skids, various sizes.

82 Turned Pedestals 24″ long.

83 Shop Vac, Degreaser etc.

84 Fuel Tank Approx. 100 gal. with hand pump.

84A Fuel Tank Located in small building in front of the kilns.

84B Fuel Tank Located in small building in front of the kilns.

84C Fuel Tank Located in small building in front of the kilns.

85 Ladders 6′ step ladder, 8′ aluminum ladder.

100 Belt Sander Belt size, 6″ x 287″, with 3′ x 9′ sliding table, 5 hp motor. This machine was in production until the entire business was closed in October of 2018.

101 Sanding Belts 6″ x 287″, and 7″ x 355″, 120-220 grit, approx. 70.

102 Hanger Bolt and Stud Machine 3/4 hp motor, air controls. This machine was in production until the entire business was closed in October of 2018.

103 Foley United Sharpener Model 75 12, serial # 1000238. This machine was in production until the entire business was closed in October of 2018.

104 McKnight-Miller Planer Chair Seat Scooper Model 1 E, serial # 10299, 16″, includes extra knives. This machine was in production until the entire business was closed in October of 2018.

105 Fletcher Machine Shaper Model FM 55 S, serial # 8755S-3, single sided edge shaper, 5″ x 25′ drive web. This machine was in production until the entire business was closed in October of 2018.

105A Tyler Machinery Drill Press Air controls, 1 1/2 hp motor, includes lift table. This machine was in production until the entire business was closed in October of 2018.

105B Metal Racks and Everything On It Belts, sanding belts, sanding heads etc.

105C Cutter Heads and Blades Everything in cabinet against wall including lots of cutter heads, blades etc.

106 Hytrol Roll Case Model 190-ACC, serial # 282832, 20′ x 34″ with 26″ steel legs, live rolls, electric drive, includes 48” dethatched extension. This machine was in production until the entire business was closed in October of 2018.

107 SCMI Double End Tenoner Concept 2000, N. AA110311, jump score and hog, jump shaper, stationary shaper, circular shaper. Made in Italy This machine was in production until the entire business was closed in October of 2018.

108 Jakes Bandsaw 18″ cutting capacity, 36″ wheels, 20′ 3″ bands, with guide. This machine was in production until the entire business was closed in October of 2018.

109 Vector Wisconsin Automated Double End Tenoner . This machine was in production until the entire business was closed in October of 2018.

109A Square D Transformer Cat. No. 30T6H, style no. 33349-28212-024, serial # 79TS22C

109B Bandsaw Bands and Misc. Misc. guards, everything on and around cart.

110 Cemco Wide Belt Sander Double head, 52″, equipped with Newman Quiet Cut helical carbide cutter head. This machine was in production until the entire business was closed in October of 2018.

111 Cemco 6000 Wide Belt Sander Double head, 52″, equipped with Newman Quietcut helical carbide cutterhead. This machine was in production until the entire business was closed in October of 2018.

112 Sanding Belts Approx. 35 belts, 52″ x 103″, 60, 80, 100, 120 and 180 grit.

113 Sanding Belts Approx. 30 belts, 52″ x 103″, 36, 100 and 120 grit.

113A Uneeda Sanding Belts Approx. 30 belts, 52″ x 103″, 180 grit.

113B Sanding Belts Approx. 30 belts, 38″ x 103″, 40, 50 and 60 grit.

114 Finzer Replacement Roll For Wide Belts 6″ x 54″

115 Bridgewood Planer Model BW-225PH, serial # G1805, 3 phase, 125 amps, 5800 RPM, 48.5 hp, 220 volts. This machine was in production until the entire business was closed in October of 2018.

116 Parts Room All parts and accessories including lots of electrical supplies, includes all conduit on top and side.

117 Parts Cabinet Includes everything on inside.

118 Heaters All heaters mounted in ceiling of building with ripsaws, total of 11.

119 Dust Pipe All dust pipe inside building with the 2 cemco wide belts, 30″ x approx. 140′, and lots of various sizes and lengths.

119A Mac Vacuum Pump . This machine was in production until the entire business was closed in October of 2018.

120 Dust Pipe All dust pipe outside front building, 44″.

121 Mac Dust Blower 64″, electric motor. This machine was in production until the entire business was closed in October of 2018.

122 Dust Bin 10′ diameter, approx. 40′ high, includes Mac rotary feeder and auger mounted to bottom of bin.<br /> 122A Werner Fiberglass Extension Ladder 40′, located underneath front dust bin.

123 Newman Hydra-Press HP-40, 6 cylinder, 40″ x 10′, includes hydraulic pack. This machine was in production until the entire business was closed in October of 2018.

124 Newman Hydra-Press HP688, Property # 3405, serial # 12262, 4 cylinder, 2-24″ x 63″ platforms, includes hydraulic pack. This machine was in production until the entire business was closed in October of 2018.

125 Adhesive Applicator 20″ x 8 1/2″ roll. This machine was in production until the entire business was closed in October of 2018.

126 Tools and Parts Cabinet Includes everything on inside.

127 Wadkin P.L.C. Planer/Moulder Model GA 220, 6 head, 15 hp heads, Wadkin through feed four side straightening, planing machine and moulder. This machine was in production until the entire business was closed in October of 2018.

128 Helical Cutter Heads 1 1/2″ shaft hole, 2- 8 1/2″, 2- 5″.

129 Cutter Heads and Cabinet 1 1/2″ shaft hole, various sizes, lots of profiles inside cabinet.

130 Cutter Heads and Cart Various sizes.

130A Cutter Heads and Shelving Various sizes and profiles.

131 Rosenquist Edge Gluer Model EB900H, serial # 1088-764-16, 5′ x 9′, 30 KW generator, 480 volts. This machine was in production until the entire business was closed in October of 2018.<br /> 132 Skate Roller 42″ x 74″ with 2″ x 38 1/2″ rolls, on incline 20″ – 25″.

133 Cameron Automation Opti-Match Model # 35A, serial # OM-102. The Opti-Match combines innovative scanning and sorting technology with complex computer programs to build and stack sized, color matched, and color blended panels automatically, was purchased in 2002. This machine was in production until the entire business was closed in October of 2018.

134 Conveyor 36″ x 20′, with 28″ steel legs, electric drive.

135 Delta Chopsaw . This machine was in production until the entire business was closed in October of 2018.

136 Steel Table 64″ x 120″ with 27″ steel legs.

137 Rosenquist Edge Gluer Model FB 1000 H, serial # 10991172 18 HD, 480 volt, 132 amp, 6′ x 12′ transfer, through gluer, onto 128″ x 140″ transfer, into 64″ x 120″ press. This machine was in production until the entire business was closed in October of 2018.

138 Grutter Upcut Saw Model 1604, serial # 25950-R. This machine was in production until the entire business was closed in October of 2018.

139 Web Conveyor 19″ x 70′ with 18″ web, 4″ sides, not assembled, includes electric motor. This machine was in production until the entire business was closed in October of 2018.

140 Diehl Straight Line Ripsaw Model SL 52, serial # 68M-2209-1507, 15 hp motor, with laser. This machine was in production until the entire business was closed in October of 2018.

141 Diehl Straight Line Ripsaw Model SL 52, serial # 76M-3795-3111, 15 hp motor This machine was in production until the entire business was closed in October of 2018.

142 Diehl Straight Line Ripsaw Model SL 52, serial # 76M-3794-3113, 30 hp motor This machine was in production until the entire business was closed in October of 2018.

143 Diehl Straight Line Ripsaw Model SL 52, serial # 5/81M-4451-3821, hp unknown, with laser. This machine was in production until the entire business was closed in October of 2018.

144 Diehl Straight Line Ripsaw Model SL 52, serial # 74M-3447-2811, 15 hp motor, with laser. This machine was in production until the entire business was closed in October of 2018.

145 Diehl Straight Line Ripsaw Model SL 52, serial # 79M-4234-360-R-00, 15 hp motor. This machine was in production until the entire business was closed in October of 2018.

146 Diehl Straight Line Ripsaw Model SL 52, serial # 11/79M-4264-3629,20 hp motor, includes 45″ x 82″ off bearer table. This machine was in production until the entire business was closed in October of 2018.

147 Diehl Straight Line Ripsaw Model SL 52, serial # 1/92M-5668-5084, 20 hp motor, includes 45″ x 82″ off bearer table. This machine was in production until the entire business was closed in October of 2018.

148 Diehl Straight Line Ripsaw Model SL 52, serial # 76M-3790-3114, 30 hp motor, with laser, includes 45″ x 82″ off bearer table. This machine was in production until the entire business was closed in October of 2018.

149 Diehl Straight Line Ripsaw Model SL 52, serial # 69M-2543-1658, 20 hp motor, with laser, includes 45″ x 82″ off bearer table. This machine was in production until the entire business was closed in October of 2018.

150 Diehl Straight Line Ripsaw Model SL 52, serial # 6/85M-4834-4245, 15 hp motor, includes 45″ x 82″ off bearer table. This machine was in production until the entire business was closed in October of 2018.

151 Diehl Straight Line Ripsaw Model SL 52, serial # 11/80M-4399-3765, 30 hp motor, includes 45″ x 82″ off bearer table. This machine was in production until the entire business was closed in October of 2018.

152 Diehl Straight Line Ripsaw Model SL 52 L.H. serial # 68M-2033-1360, 30 hp motor, includes 45″ x 82″ off bearer table. This machine was in production until the entire business was closed in October of 2018.

152A Ripsaw Blades and Shelf 16″ and 17 1/2 “, approx. 15

152B Ripsaw Blades and Wooden Work Bench 16″, approx. 14

153 Roll Case 27″ x 72″ with 2″ x 23 1/2″ rolls, 17″ steel legs, electric drive.

154 Lewco Web Conveyor 27″ x 72″ with 23 1/2″ web, 27″ steel adjustable legs, electric drive. This machine was in production until the entire business was closed in October of 2018.

155 Roll Case 27″ x 72″ with 2″ x 23 1/2″ rolls, 17″ steel legs, electric drive.

156 Web Conveyor 6″ x 56′ with 4″ sides, electric drive. This machine was in production until the entire business was closed in October of 2018.

157 Stone Web Conveyor 56′, 12″ web with 4″ sides. This machine was in production until the entire business was closed in October of 2018.

158 Stenner Eagle Band Resaw Mc. No. AH, Mc. Size 36, serial # 9152, with feed roller assembly, 208″ x 4″ band. This machine was in production until the entire business was closed in October of 2018.

159 Slide Off Table 38″ x 49″, 38″ high down to 12″. This machine was in production until the entire business was closed in October of 2018.

160 Slide Off Sorter Table 50″ x 82″ This machine was in production until the entire business was closed in October of 2018.

161 Slide Off Sorter Table 82 1/2″ x 96″, 1st lot of an entirety. This machine was in production until the entire business was closed in October of 2018.

162 Slide Off Sorter Table 83 1/2″ x 96″ This machine was in production until the entire business was closed in October of 2018.

163 Slide Off Sorter Table 84 1/2″ x 96″ This machine was in production until the entire business was closed in October of 2018.

163A Web Conveyor With Kickoff 19″ x 32″ with 14″ web, 37 1/2″ steel legs, 6 bay sorting system, air controlled, electric drive. This machine was in production until the entire business was closed in October of 2018.

163B Barr-Mullin Optimizing Chop Saw The Brute, 12″ left handed, includes transformer. Original computer. This machine was in production until the entire business was closed in October of 2018.

163C Keim Transfer Deck 6 strand, 12′ x 13′ 6″, hydraulic drive, 34″ steel legs, includes hydraulic pack. This machine was in production until the entire business was closed in October of 2018.

163D Entirety Lot # 161-163C With 10% raise. This machine was in production until the entire business was closed in October of 2018.

164 Hytrol Web Conveyor 20″ x 52″, 16″ web, 25 1/2″ steel adjustable legs, onto 20″ x 13′ conveyor on incline, adjustable height, 16″ web with 4″ sides, electric drive. This machine was in production until the entire business was closed in October of 2018.

165 Slide Off Sorter Table 83″ x 120″ 1st lot of an entirety. This machine was in production until the entire business was closed in October of 2018.

166 Slide Off Sorter Table 83″ x 120″ This machine was in production until the entire business was closed in October of 2018.

167 Slide Off Sorter Table 83″ x 120″ This machine was in production until the entire business was closed in October of 2018.

168 Slide Off Table 21″ x 66″, 43″ high down to 33″. This machine was in production until the entire business was closed in October of 2018.

169 Web Conveyor With Kickoff 13″ x 32′ with 8″ web, 39″ steel legs, 6 bay sorting system, air controlled, electric drive. This machine was in production until the entire business was closed in October of 2018.

170 Keim Optimizing Chopsaw 8″ right handed, includes transformer. These machines are manufactured in Sugarcreek Ohio and are supported. Original computer. This machine was in production until the entire business was closed in October of 2018.

171 Eagle Transfer Deck 6 strand, 10′ x 12′, with 34″ steel legs, electric drive. This machine was in production until the entire business was closed in October of 2018.

172 Entirety Lot # 165-171 With 10% raise. This machine was in production until the entire business was closed in October of 2018.

173 Lift Table 60″ x 90″, 4000 lb. This machine was in production until the entire business was closed in October of 2018.

174 Lift Table 60″ x 84″ This machine was in production until the entire business was closed in October of 2018.

175 Metal Rack On Wheels Includes everything on shelves.

176 Tool Box Includes all tools, allen wrenches, and lots of bolts etc.

177 Work Table and Tool Box Tool box is loaded with tools, includes everything on table.

178 Feed Rolls Various sizes.

179 Metal Rack On Wheels Includes everything on shelves, various sizes of feed rolls.

180 Sullair Industrial Air Compressor Model LS-12-50H/A/SUL, serial # 003-120665, 115/125 PSIG, with 50 hp premium efficiency 3 phase induction motor This machine was in production until the entire business was closed in October of 2018.

181 Mac Vacuum Pump Model 3HVF, serial # 87-PDBH-08-004, 3 hp electric motor. This machine was in production until the entire business was closed in October of 2018.

182 Van Air Aftercooler Model 83-0706, serial # VA1191. This machine was in production until the entire business was closed in October of 2018.

183 Van Air Deliquescent Dryer Model D-20, serial # 112811. This machine was in production until the entire business was closed in October of 2018.

184 Van Air Dry-O-Lite Gas Dry Prime Chemical drying tablets for natural gas or compressed air dryers, 6 bags. This machine was in production until the entire business was closed in October of 2018.

185 Low Profile Lumber Carts Heavy duty, 36″ x 60″ with 6 steel wheels, 6″ off ground

186 Low Profile Lumber Carts Heavy duty, 36″ x 60″ with 6 steel wheels, 6″ off ground

187 Bluerock Wire Stripper Model WS-212, 2 hp electric motor, looks like new, mounted on 36″ x 95″ heavy duty steel table, with steel vise, 18″ steel legs This machine was in production until the entire business was closed in October of 2018.

187A Hytrol Roll Case 1 1/2 ” x 21 1/2″ rolls, approx. 50′, not assembled, as is This machine was in production until the entire business was closed in October of 2018.

188 Hytrol Web Conveyor 30″ x 12′, 23 1/2″ web, 31″ adjustable steel legs, electric drive This machine was in production until the entire business was closed in October of 2018.

189 Industrial Upcut Saw Serial # N51OR-12-96085, air over hydraulic control, 7.5 hp motor This machine was in production until the entire business was closed in October of 2018.

190 Wooden Conveyor 80″ x 32′ with 71 1/2″ wooden boards, 34″ off ground electric drive

191 Oliver Straitoplane Model 2170, serial # 99151, 36 ” cutterhead Newman heads This machine was in production until the entire business was closed in October of 2018.

192 Diehl Straight Line Ripsaw Model SL52 This machine was in production until the entire business was closed in October of 2018.

193 Roll Case 54″ x 18′ with 5 1/2 ” x 36″ rolls, 26″ steel legs, with 6-strand on feed chain, electric drive

194 Reckart Transfer Deck 6-strand, 14′ 8″ x 19′ 6″, 24 ” steel legs, electric drive This machine was in production until the entire business was closed in October of 2018.

195 Roll Case 42″ x 24′ with 5 1/2 x 24″ rolls, 29″ steel legs, with 6 strand on feed chain, electric drive

196 Roll Case 38″ x150″ with 5 1/2 x 24″ rolls, 29″ steel legs, electric drive

197 HMC Transfer Deck Tilt Hoist and Web Conveyor 14′ 8″ x 20′, 5 strand with 72″ steel structure legs, electric Tulsa gear drive, max 81X chain. With tilt hoist and 31′ x 19″ web conveyor with 13 1/2″ web, electric drive This machine was in production until the entire business was closed in October of 2018.

198 Hydraulic Pack 5 hp motor This machine was in production until the entire business was closed in October of 2018.

199 Transfer Table Hydraulic drive, 52″ x 108″ with 28″ steel legs This machine was in production until the entire business was closed in October of 2018.

200 Rosenquist Electronic Gluer Model 600H 6.5, serial # 884600H17, 45″x76″ press This machine was in production until the entire business was closed in October of 2018.

201 Chain Conveyor Electric drive, 3/4 hp motor, as is This machine was in production until the entire business was closed in October of 2018.

202 Dust Pipe All dust pipe inside from Wadkin moulder (Lot 127) to Oliver planer (Lot 191), lots of different sizes

203 Dust Bin Approx. 40 ‘ tall, 10′ diameter, mounted on steel structure

204 Mac Rotary Feeder Model FR20X16, serial # 87-ALSD-08-018, 18″, 2 hp electric motor This machine was in production until the entire business was closed in October of 2018.

205 Mac Dust Blower Model 408BI-III-ARR9, serial # 87-FANS-08-002, 64″ fan, 100 hp electric motor This machine was in production until the entire business was closed in October of 2018.

206 Dust Pipe On Outside All dust pipe on outside, by Lots 203 and 205, 48″

207 Dust Auger 32′ on incline, 12″ auger, electric drive, includes steel structure legs, enclosed This machine was in production until the entire business was closed in October of 2018.

208 Challenger Grinder Model CH300-4055-SR, serial # 0803H0305, 480 V, 3 Ph, 60 Hz, 40″ This machine was in production until the entire business was closed in October of 2018.

209 Vibrating Conveyor 12″x26’6″, with 4″ sides, 5 hp electric motor This machine was in production until the entire business was closed in October of 2018.

210 Cyclone With blower, electric drive This machine was in production until the entire business was closed in October of 2018.

211 Structure for Cyclone 12’x14′

212 Carolina Dust Blower Serial # 4157, size 30 6, 10 hp electric motor, 30″ fan This machine was in production until the entire business was closed in October of 2018.

213 Dust Pipe All dust pipe between Challenger Grinder and cyclone, 12″

213A Up and Over Step

213B Torch Set Tanks not included This machine was in production until the entire business was closed in October of 2018.

213C Lincoln Ranger 8 Generator with Lincoln LN-25 Arc Welder . This machine was in production until the entire business was closed in October of 2018.

214 Hankison Air Dryer Model DH-370,serial # 3336-2-9805-7D, pressure-swing regenerative desiccant compressed air dryer This machine was in production until the entire business was closed in October of 2018.

215 C.R. Onsrud CNC Router Model 120P12D, serial # 12P31201, panel tech, well maintained machine that is only 12 years old, includes transformer 5’x10′ table This machine was in production until the entire business was closed in October of 2018.

216 Becker Vacuum Pump No. 2352095, Type VTLF500SK with 15 kw motor, was used on Lot 215 This machine was in production until the entire business was closed in October of 2018.

217 Thermwood CNC Router Model 53, serial # C531111097, 460 V, 5’x10′ table, has bad drive, includes transformer This machine was in production until the entire business was closed in October of 2018.

218 Polymac Edgebander Model ERGHO 3, serial 06509, 220 V, automatic single sided edge banding machine, includes transformer This machine was in production until the entire business was closed in October of 2018.

219 Lift Table 48″x96″ This machine was in production until the entire business was closed in October of 2018.

220 SCM Panel Saw Type SEZ.MONS.S, serial AE/030057, 230 V, made in Italy This machine was in production until the entire business was closed in October of 2018.

221 Balestrini Mortison Tenon Machine 220 V, 60 Hz, Made in Italy. Model PICO. &nbsp; This machine was in production until the entire business was closed in October of 2018.

222 W & H Moulder P202 This machine was in production until the entire business was closed in October of 2018.

223 Balestrini Micron 2 Slot Mortiser 220 V, 60 Hz, Made in Italy. Model MICRON. This machine was in production until the entire business was closed in October of 2018.

224 Transformer Spec. 1445433T100, Cat. T4H30, KVA 30, H.V. 480, L.V. 240, was used for Lot 220 and 223 This machine was in production until the entire business was closed in October of 2018.

225 Sicotte Boring Machine Model J-20, serial # 565, 6 head, 12″x 84″ adjustable height table This machine was in production until the entire business was closed in October of 2018.

226 Dual Head Profile Sander Serial # 3-008-R639-02, 460 V, 60Hz, made in Italy This machine was in production until the entire business was closed in October of 2018.

227 Dual Head Profile Sander Serial # 3-057-R736-03, 460 V, 60 Hz, made in Italy This machine was in production until the entire business was closed in October of 2018.

228 Hytrol Roll Case 30″ x124″ with 26 3/4″ x2″ rolls with 27″ adjustable steel legs, electric drive This machine was in production until the entire business was closed in October of 2018.

229 Sanding Belts and Workbench 50+ sanding belts for lot 226 and 227, 2 1/2″ x 109″, 150 and 220 grit, includes bench and everything on it

230 Whirlwind Edge Sander Model 648,serial # 106074, 6″ x approx. 64″ belt, 8″ x 46″ adjustable table This machine was in production until the entire business was closed in October of 2018.

231 Unique Router Model 310, serial # 06110Z245, raised panel frame router This machine was in production until the entire business was closed in October of 2018.

232 Unique Profile Machine Model 250, serial # 1411070250, the 250 is the “all in one” cell door manufacturing machine. Allowing one operator to make all 5 components of a raised panel door in less than 2 minutes. This machine was in production until the entire business was closed in October of 2018.

233 Transformer Cat. No. 63-623OSH, 3 phase, was used on lot 231 and 232 This machine was in production until the entire business was closed in October of 2018.

234 Cemco Buffer Electric 3 phase motor This machine was in production until the entire business was closed in October of 2018.

235 Tannewitz Bandsaw Model GH, serial # 15895, 36″ wheels, 19′ 6″ bands This machine was in production until the entire business was closed in October of 2018.

236 SCMI Table Saw Model GH, serial # 15895, 36″ wheels, 19′ 6″ blade length This machine was in production until the entire business was closed in October of 2018.

237 Central Machinery Dovetail Machine Model 600 Dovetailer, serial # DTI-319-96R This machine was in production until the entire business was closed in October of 2018.

238 Central Machinery Dovetail Machine Model 601 Dovetailer, serial # DT2-299-96 This machine was in production until the entire business was closed in October of 2018.

239 Glue Up Table 6’x12′

240 Metal Rack and Wooden Workbench Rack needs new wheels

241 Pallet Racking 2-set of legs, 34″x150″, 2-set 34″x17″, 19-set of 10′ arms, everything on shelves included

241A Marathon Trash Hopper 2 yd. self- dumping

242 Barrel Cart, Barrels, and Skate Rollers 2 pieces, 18″ x 58″ skate rollers, barrel cart looks rough

243 Metal Racks and Blades Everything on racks included, needs 1 new wheel

244 Almex Thermolaminator Model TL6-59-114V, serial # 2003-10-10961, 480 volts, 3 phase, 60 Hz, 60″ drive web, was used to laminate veneer to particle board, includes 5’x10′ infeed and outfeed, 48″ web electric drive This machine was in production until the entire business was closed in October of 2018.

245 DeWalt 12″ Chopsaw With sawgear automatic length measuring by TigerStop, includes tables on either side of saw, 20′ total This machine was in production until the entire business was closed in October of 2018.

246 Hytrol Skate Roller 28″x20′ with 2″x24 3/4″ rolls, 37″ adjustable steel legs, no drive, includes wooden work table underneath This machine was in production until the entire business was closed in October of 2018.

247 Almex Laminator Model LAB 4-7, serial # A0495-68, 3 phase 60 Hz, 480 V, 100 PSI max operating pressure, 48″ web This machine was in production until the entire business was closed in October of 2018.

248 Roach Web Conveyor 5’x10′ with 51″ web, electric drive, 31″ adjustable legs This machine was in production until the entire business was closed in October of 2018.<br /> 249 Roach Web Conveyor 5’x10′ with 51″ web, electric drive, 31″ adjustable legs, serial # 210115-2 This machine was in production until the entire business was closed in October of 2018.<br /> 250 Interthor Trans Positioner Pallet Jack 2200 lb. capacity, No. LX515719, needs 1 new wheel This machine was in production until the entire business was closed in October of 2018.

251 Hot Glue Applicator Matr. N. 10401, Type C2R, 440 V, 60 Hz, 51″ rolls This machine was in production until the entire business was closed in October of 2018.

252 Inspecto Light Various conditions, total of 5

253 Work Bench and Hose 28″x 48″ work bench, includes hose on wall

254 21 Blade Grooving Machine Was used to make raised panel doors and wainscoting This machine was in production until the entire business was closed in October of 2018.

255 Savi Veneer Guillotine HFK-26OS automatic, 103″ cutting length, 4″ daylight opening, serial # 805830 This machine was in production until the entire business was closed in October of 2018.

256 Web Conveyors 15″x 84″ and 15″x 45″, both with 12″ web, 30 1/2″ steel legs, electric drive This machine was in production until the entire business was closed in October of 2018.

257 Balestrini Shaper Model C70IN, serial # L433 BE4, double arbor This machine was in production until the entire business was closed in October of 2018.

258 Black Brother Hot Glue Applicator Serial # 121811, 26″ rolls This machine was in production until the entire business was closed in October of 2018.

259 Invicta Shaper Model TI-14, single arbor This machine was in production until the entire business was closed in October of 2018.

260 Skate Roller 28″x20′ with 2″ x 24 3/4″ rolls, with 24″ adjustable legs

261 Metal Rack On Wheels 6 shelves, wheels need replaced

262 DMC Unisand 2000 53″ 2-Head wide-belt sander. Model US 1350 M2, N.SA/004475, Ref. 091720, number w.d. 2947308041A, Made in Italy This machine was in production until the entire business was closed in October of 2018.

263 Baxtor No. 9 Shaper Machine No. 7471, double arbor This machine was in production until the entire business was closed in October of 2018.

264 Craftsman Toolbox with Lots of Shaper Heads assortment of heads

265 Bridgewood Downdraft Table Model DT-1000, serial # 002619, motor 1/2 hp, 160 Hz, 1 phase, 110 V, 28″ x 35″ x 32″ high This machine was in production until the entire business was closed in October of 2018.

266 Bridgewood Downdraft Table 28″ x 35″, 32″ high This machine was in production until the entire business was closed in October of 2018.

267 Bridgewood Downdraft Table 28″ x 35″, 32″ high This machine was in production until the entire business was closed in October of 2018.

268 Worktable with Tools, Clams, and Accessories 5’x10′, includes everything

269 Off Bearer Stands with Rolls 13′, adjustable height legs 32″-45″, total of 2

270 Hoffman Dovetail Routing Machine Typ: MU2-P, serial # 94738 This machine was in production until the entire business was closed in October of 2018.

271 Diehl Tapeless Splicer Model 890, serial # 63-M849-152 This machine was in production until the entire business was closed in October of 2018.

272 SPI Comparator Gauge # 074528 This machine was in production until the entire business was closed in October of 2018.

273 Metal Rack and All Accessories on Wall Shelves Rack needs wheel replaced

274 Heaters All heaters in building with CNC Routers, total of 7 mounted in ceiling, 2 are located in back section of building

275 Dust Pipe All dust pipe inside of building with CNC Router

276 Dust Bin Approx. 30′ high, 12’diameter, includes frame

277 Mac Rotary Feeder 24″ on bottom of dust bin, electric drive This machine was in production until the entire business was closed in October of 2018.

278 Auger 32′, 12″ auger, electric drive This machine was in production until the entire business was closed in October of 2018

279 Mac Vacuum Pump . This machine was in production until the entire business was closed in October of 2018.

280 Northern Dust Blower Serial # A47117-1, size 4025, 48″ This machine was in production until the entire business was closed in October of 2018.

281 Dust Pipe All dust pipe on outside of building, 40″

282 Metal Rack and Workbench Includes computer, cordless tools, and chargers

283 Lift Table 5’x93″, 4000 lb. lift This machine was in production until the entire business was closed in October of 2018.

284 Spray Guns and Workbench 49″x97″ workbench, includes 10 can sprayers and everything else on table

285 Spray Booth 10’x12′ with exhaust fan, 99″ high This machine was in production until the entire business was closed in October of 2018.

286 Metal Cabinet Includes everything on inside: hardener, sealer, lacquer, etc., 49″x60″x59″ high

287 Wooden Cabinet and Contents 24″x48″x84″ high, open end wrenches, allen wrenches, etc.

288 Jet Drill Press Model JDP-142, serial 1070954 This machine was in production until the entire business was closed in October of 2018.

289 Aluminum Ramp 60″ x 71″, 6 1/2″ off ground

290 Wooden Workbench and Contents 26″x103″, light bulbs, etc

291-296 Stackable Steel Rack 64″96″x84″ high, 6 shelves

297 Orgapack Electric Banding Machine Includes banding This machine was in production until the entire business was closed in October of 2018.<br /> 298 Metal Racks Total of 6, 18″x48″x72″ high

299 Powermatic Houdaille Model 60, serial 7861288 This machine was in production until the entire business was closed in October of 2018.

300 Atlas Copco Stationary Air Compressor Type GAU-807 compressor, serial # ARP-879-802, motor serial # SC213022, 100 hp general electric motor This machine was in production until the entire business was closed in October of 2018.

301 Stegherr Shaper Typ KSF, Masch.-Nr.14/9824, 4.5 Kw, 220V, 6 bar, 60 Hz, single arbor This machine was in production until the entire business was closed in October of 2018.

302 Heeseman Sander Type DBV1 machine # 6607222, 90″ conveyor belt, approx. 14′ sanding belt, 7″ wide, fully automatic 2-belt sanding machine, made in Germany This machine was in production until the entire business was closed in October of 2018.

303 Goodspeed Saw 2-blade with 9 1/2″ conveyor This machine was in production until the entire business was closed in October of 2018.

304 Foldup Steel Table 48″x15′, 32″ high

305 Diehl Straight Line Ripsaw SL52, serial #12/78M4137, 30 hp motor, rough condition This machine was in production until the entire business was closed in October of 2018.

306 Critz Profile Sander 400-ST Dual head, belt- 2710M4- spring L,H, This machine was in production until the entire business was closed in October of 2018.

307 Steel Bench 24″x96″x37″ high

308 Air Powered Press 6′ max This machine was in production until the entire business was closed in October of 2018.<br /> 309 Hytrol Conveyor Approx. 80′ total, condition unknown This machine was in production until the entire business was closed in October of 2018.

310 Greenlee 180-B Shaper Serial # 51139 Dual Arbor This machine was in production until the entire business was closed in October of 2018.

311 Forklift Charger Hoburt Model 18PBI-525, serial # 3TRY-18411 This machine was in production until the entire business was closed in October of 2018.

312 Adjustable Suction Table 6’x10′ with 2’x6′ cutout with 3’x6′ steel table, 31″ high This machine was in production until the entire business was closed in October of 2018.

313 Wadkin Through Feed Planer/Moulder Machine # GA 326, test no. 90354, 220/440 V, 3 phase, 60 Hz This machine was in production until the entire business was closed in October of 2018.

314 Dust Collector 5 hp motor This machine was in production until the entire business was closed in October of 2018.

315 Northteck Dust Collector Model NT-005-3, serial # 020801, 7.5 hp motor, looks new This machine was in production until the entire business was closed in October of 2018.

316 Northteck Dust Collector Model NT-005-3, serial # 020805, 7.5 hp motor, looks new This machine was in production until the entire business was closed in October of 2018.

317 J.M. Lancaster Furniture Clamping Machine Serial # 600-C-114 This machine was in production until the entire business was closed in October of 2018.

318 Crouch Shaper Model Crouch/Larick 310C, serial # 103093, single arbor This machine was in production until the entire business was closed in October of 2018.

319 US Concepts Shaper Serial # 200950, 10 hp, 13.5 A, 460 V primary This machine was in production until the entire business was closed in October of 2018.

320 C.R. ONSRUD Inverted Router Model 36210, serial # 36951204, 11.8 A, 460 V, 3 Ph, 60 Hz This machine was in production until the entire business was closed in October of 2018.

321 Kellogg American Air Compressor Model A462TVX, serial # 816146 with 25″ 4-groove pulley This machine was in production until the entire business was closed in October of 2018.

322 Cardboard Boxes 5″x19″x99″, approx. 130

323 Adjustable Legs for Rollcases, etc. total of 7

324 Pallet Racking Arms 9′, 3 set

325 Gardner Denver Air Compressor Model EDE99K, serial # 5076852

326 Air Tank 24″x70″

327 Pulleys 1- 8 groove 27 1/2″ with 5″ shaft opening & 3- 2 groove 30 1/2″ with 3 3/4″ shaft opening

328 Steel Duct

329 Electric Motors All motors on pallets, approx. 15 and 1 compressor, 3- 20 Hp, condition unknown

330 Electric Motors and Oil Filters Approx. 20 motors, condition unknown, everything on shelves included

331 Wooden Cabinet with Tools

332 Wooden Cabinet with Access

333 Wooden Workbench and Blades 2- 12″ and 2- 18″ blades

334 Steel Platform

335 Pipers Band Cutter

336 Solar Battery Charger No. 550

337 Banding Cart

338 Briggs & Stratton Snowblower

339 2 Lawnmowers and Weed Eater

340 Coleman Powermate Generator Maxa 5000 ER

341 Honda 3500 Generator

342 Wheelbarrow

343 BT Pallet Jack

344 BT Pallet Jack

345 2 Electric Motors 20 hp, frame 256T, Lincoln Toshiba 7.5 hp, frame 254T

346 Water Hose

347 Masonry Cement 5 bags

348 Brooms Shovels Post Hole Digger

349 Shovels 6

350 Brooms 8

351 Dust Technology Dust Collector Model DT-100, serial # 23041477, 10 hp motor

352 Mereen Johnson Double End Tenoner Serial # 5660

353 Electric Motors and Accessories 10 hp, includes everything on shelves

354 Liquid Pump Includes barrel and hoses

355 Vertical Boring Machine Serial # 6654, style C-H, 5 head, 10 hp motor

356 Dust Blower 24″, 15 hp motor

356A Dust Pipe All dust pipe in building across road, approx. 70′ various sizes

356B Dust Bin 8′ diameter, includes frame and dust pipe on outside

357 Band Tighteners Belts and Accessories Includes everything on shelves and on floor

358 Grutter Upcut Saw Model 1604, serial # 26068-L, 18″ blade

359 Upcut Saw 18″ blade, no tag

360 Upcut Saw 18″ blade, no tag

361 Hytrol Web Conveyor Model TA, serial # 257453, 28″ x 40′ with 24″ web, 26″ adjustable steel legs, electric drive

362 Vibrating Conveyor 50′, 12″ pan with 4″ sides, electric drive

363 BMI Optimizing Cutoff Saw Wonder Saw, serial # 1204T11134, right handed

364 Web Conveyor 19″ x 32′ with 14″ web, air controlled kickoff with 6 bay sorting system

365 Slide Off Sorter Table 59″ x 12′

366 Slide Off Sorter Table 59″ x 10′

367 Roach Roll Case 24″ x 10′ with 2″ x 20 3/4″ rolls, 34″ steel legs, electric drive

368 Van Air Dryer Model D-12, serial # 117159, 48″ x 13″

369 JLM Lift Table 30″ x 49″

370 Sawblades Wood Cabinet and Fan 16″, 18″, and 22″ saw blades, total of 12, some resharpened, everything in cabinet including some good tools

370A Salor Beall Two Stage Air Compressor Model PI-95024-D, serial # 9Y-16-V93, 30 hp electric motor, 32″ x 84″ tank

371 Trash Hopper 2 cu. yd. self dumping

372 Trash Hopper 2 cu. yd. self dumping

373 Trash Hopper 2 cu. yd. self dumping

374 Trash Hopper 2 cu. yd. self dumping, no latch, needs work

375 Trash Hopper 2 cu. yd. self dumping, latch needs work

376 Trash Hopper 2 cu. yd. self dumping, latch needs work

377 Trash Hopper 2 cu. yd. self dumping

378 Trash Hopper 2 cu. yd. self dumping, latch is broken

379 Trash Hopper 2 cu. yd. self dumping, no latch

380 Trash Hopper 2 cu. yd. self dumping, safety latch needs work

381 Electric Motors and Misc. Pulleys, casters etc. includes everything on shelves in corner, and on floor

382 Pipe Clamps Misc. Rods Everything in box

383 Parts For Woodworking Machines Everything on shelves and on floor directly in front of it

384 Work Table and Organizing Cart On Wheels

385 4 Twin Bed Frames and Wooden Storage Box On Wheels

386 Shelf Of Misc. Belts, 2 1/2″ shutoffs, light bulbs

387 Misc. Parts For Boiler and Etc. Includes table in front of shelf

388 Shelf Of Misc. Sprockets, belts, lights, metal cabinet

389 Spool of Wire Colonial E148891, 310 AWG, 600 V

390 Wickes Boiler and 34′ x 48′ Steel Frame Building Wickes Boiler, 800 hp. order # 64024-2, year 1962, Max. W.P. 200 lbs./sq. in. Blr. H.S. 3543 sq. ft. W.W.H.S 320 sq. ft. A.S.M.E. No. 6054, N.B. No. 2912, includes everything in building except auger that comes in from Harvestone silo

391 Auger 40′ x 12″

392 Harvestone Silo 40′ approx. 25′ diameter

393 Honeyville Bucket Elevator Approx. 50′, includes 12’ auger on ground

394 Electrical All electrical in building with ripsaws

395 Electrical All electrical in building with CNC routers and small room attached

396 Electrical All electrical in building across road

397 Electrical All electrical in building with stacking sticks

398 Electrical All electrical in sawmill building

700 Hyster Forklift Model H110XM, serial # K005V06013A, diesel, has small fuel leak, side shift, 10,000 lb. lift, 60″ forks, dual wheel front end, 3 stage mast

701 Hyster Forklift Model H100XL, serial # G005D056525, diesel, side shift, 8000 lb. lift, 60″ forks, 3 stage mast, needs new tires, loses its prime but will try to have fixed by auction time

702 Clark Forklift Model GPX40, type D, serial # GPX710V-0137-9078FB, diesel, 2 speed, 60″ forks, 7600 lb. lift, no side shift, 3 stage mast

703 Hyster Electric Forklift Model E80XL, serial # C098V04828V, 54″ forks, side shift, 7600 lb. lift, 3 stage mast, needs new battery

704 Hyster Electric Forklift Model E80XL3, serial # C098N03119B, 7100 lb. lift, 60″ forks, 3 stage mast, side shift, needs new battery

705 Hyster Electric Forklift Model E80XL, serial # C098D02654T, side shift, 7200 lb. lift, 66″ forks, 3 stage mast, needs new battery

706 Hyster Electric Stand On Forklift Model E40ER, serial # Z933W151OR, 3300 lb. lift, 3 stage mast, side shift, needs new battery

707 Hyster Electric Stand On Forklift Model E40ER, serial # Z933W1641R, 3700 lb. lift, 2 stage mast, 42″ forks, needs new battery

708 Dresser Loader Model 510, serial # 899, PIN 3380141C002123&, 92″ bucket, 3689 hours, 1 tire at 90%, 1 at 30%, 2 need replaced, includes forks, good working machine

709 SCR Charger Model SCRFLX-18-865T1Z, serial # M07015

710 Hertner Battery Charger Model TW18-960, Serial # U54815-3-01

711 GMC TopKick Box Truck VIN 1GDM7H1J518912, Cat Diesel, needs battery, rough condition, 349,555 miles

712 GMC TopKick Grain Truck Diesel 7000, VIN 1GDM7D1Y1HV527743, has roll tarp, doesn’t run, 275,411 miles

750 Oak and Popular Cutoffs, 5 skids

751 Oak and Popular Cutoffs, 5 skids

752 Oak Cutoffs, 4 skids

753 Popular Glueups 1/2″ thick, 11″ x 37″, 9″ x 32″, 11″ x 32”, 11” x 19”, 9 1/2” x 19”, 4 skids

754 Oak and Cherry Cutoffs, 3 skids

755 Oak, Popular and Cherry Cutoffs, 4 skids

756 Oak Cutoffs, 4 skids

757 Oak and Cherry Cutoffs, 4 skids

758 Oak and Cherry Cutoffs, 4 skids

759 Breeze Drying Sticks 60” approx. 400 pcs.

760 Breeze Drying Sticks 60” approx. 250 pcs.

761 Stacking Sticks 60” approx. 600 pcs.

762 Red Oak 1” approx. 2268 sq. ft.

763 Red Oak 5/4 approx. 1070 sq. ft.

764 Red Oak 1/2” approx. 1130 sq. ft.

765 Hard Maple 1″ approx. 1035 sq.ft.

766 Oak 1/2” approx. 900 sq. ft.

767 Hickory 1” approx. 1085 sq. ft.

768 Maple 3/4” approx. 960 sq. ft.

769 Maple 3/4” approx. 960 sq. ft.

770 Maple 3/4” approx. 960 sq. ft.

771 Maple 3/4” approx. 960 sq. ft.

772 Maple 3/4” approx. 960 sq. ft.

773 Maple 3/4” approx. 960 sq. ft.

774 Red Oak 3/4” approx. 1400 sq. ft.

775 Hard Maple 3/4” approx. 460 sq. ft.

776 Maple 3/4” approx. 170 sq. ft.

777 Hard Maple 3/4” approx. 750 sq. ft.

778 Hard Maple 3/4” approx. 600 sq. ft

779 Hard Maple 3/4” approx. 1540 sq. ft.

780 Pine 1 1/2” approx. 1288 sq. ft.

781 Pine 1 1/2” approx. 7080 sq. ft.

782 Pine 1 1/2” approx. 7920 sq. ft.

783 White Oak 3/4” approx. 1430 sq. ft.

784 White Oak 3/4” approx. 2740 sq. ft.

785 White Oak 1” approx. 890 sq. ft.

786 White Oak 3/4” approx. 310 sq. ft.

787 Pine 5/4 approx. 1830 sq. ft.

788 Cherry 5/4 approx. 880 sq. ft.

789 Cherry and Popular 5/4 approx. 730 sq. ft.

790 Cherry 5/4 approx. 1810 sq. ft.

791 Beech 3/4” approx. 960 sq. ft.

792 Yellow Birch 5/4 approx. 3100 sq. ft.

793 Yellow Birch 3/4” approx. 94 sq. ft.

794 Yellow Birch 3/4” approx. 500 sq. ft.

795 Cherry Cutoffs 1” 3 skids

796 Cherry Cutoffs 1” 6 skids

797 Cherry Cutoffs 1” 4 skids

798 Oak Cutoffs 1” 6 skids

799 Oak Cutoffs 1” 4 skids

800 Particle Board 97” x 60” x 1” and some 3/4” 1 skid

801 Particle Board 61” x 97” x 7/16” 54 pcs.

802 Particle Board 61” x 97” x 7/16” 54 pcs.

803 Particle Board 61” x 97” x 7/16” 54 pcs.

804 Particle Board 61” x 97” x 7/16” 54 pcs.

805 Particle Board 61” x 97” x 7/16” 54 pcs.

806 Particle Board 61” x 97” x 7/16” 54 pcs.

807 Particle Board 61” x 97” x 7/16” 54 pcs.

808 Particle Board 61” x 97” x 7/16” 54 pcs.

809 Particle Board 61” x 97” x 7/16” 54 pcs.

810 Particle Board 61” x 97” x 7/16” 54 pcs.

811 Particle Board 61” x 97” x 7/16” 54 pcs.

812 Particle Board 61” x 97” x 7/16” 54 pcs.

813 Red Oak 1” approx. 1770 sq. ft.

814 Bass Wood 5/4 approx. 3000 sq. ft.

815 Red Oak 1” approx. 460 sq. ft.

816 White Oak and Pine 1” approx. 1900 sq. ft. oak, 1 1/2” approx. 600 sq. ft. pine, 3 skids

817 Beech Approx. 500 sq. ft. 1” and 1 1/2”

818 Soft Maple Approx. 810 sq.ft. 3” thick x 56”

819 Particle Board 61” x 145” x 1/2” 48 pcs.

820 Particle Board 61” x 145” x 1/2” 48 pcs.

821 Particle Board 61” x 145” x 1/2” 48 pcs.

822 Particle Board 61” x 145” x 1/2” 1 full bundle 48 pcs. And 1 partial bundle

823 Red Oak Cutoffs 1” 3 skids

824 Hard Maple 1/2” x 9 1/2” x 26” over 400 pcs. 2 skids

825 Popular Cutoffs 5/4

826 Red Oak Cutoffs 1”- 1 1/2” 3 skids

827 Popular Turned Legs 4″ x 3 1/4″ approx. 2800 pcs. 2 skids

828 Oak Turned Legs 4 3/4″ x 3″ approx. 3900 pcs. 3 skids

829 Red Oak and Ash Spindles Variety of sizes, 5 skids

830 Oak With Groove 1 3/4” x 1 3/4” various lengths, 7 skids

831 Cherry Pieces 2 3/4” x 2 3/4” x 10” approx. 2070 pcs.

832 Assortment of Lumber

833 2 1/2” x 2 1/2” x 35” Sticks 1000 pcs. 4 skids

834 3 1/2” x 2 1/2” x 35” Sticks 4 skids

835 2 1/2” x 2 1/2” Cherry Sticks Various lengths 3 skids

836 Birch Sticks 3″ x 3″ various lengths, 4 skids

837 Red Oak Sticks 2 1/4″ x 2 1/4″ variety of sizes, 3 skids

838 Oak Sticks 3 skids, various sizes and lengths

839 Hard Maple Sticks 3 skids, various sizes and lengths

840 Cherry Sticks 3 skids, various sizes and lengths

841 Maple Sticks 3 skids, various sizes and lengths

842 Stacking Timbers 3″ x 3″ x 60″ approx. 80 pcs.

843 60″ Drying Sticks Approx. 3600 pcs.

844 60″ Drying Sticks Approx. 3400 pcs.

845 60″ Drying Sticks Approx. 2500 pcs.

846 60″ Drying Sticks Approx. 3600 pcs.

847 60″ Drying Sticks Approx. 3600 pcs.

848 60″ Drying Sticks Approx. 3400 pcs

849 60″ Drying Sticks Approx. 2700 pcs.

850 60″ Drying Sticks Approx. 3600 pcs.

851 60″ Drying Sticks Approx. 3600 pcs.

852 60″ Drying Sticks Approx. 3600 pcs.

853 60″ Drying Sticks Approx. 3600 pcs.

854 60″ Drying Sticks Approx. 3600 pcs.

855 60″ Drying Sticks Approx. 3600 pcs.

 

Listing Contact

Bright Star Realty and Auctions
Phone: 574-825-0704
Email: lb@brightstarauctions.com

Share This Listing

11751 CR 12 · Middlebury IN 46540
Phone - (574) 825-0704

Get the inside track on upcoming auctions

Insider Information

Get the inside track on upcoming  auctions

Thank You!

Please check your email to confirm your subscription.

Scroll to Top